Skip to content

cdk8s-plus-30 (TypeScript)

Constructs

AbstractPod

Initializers 

import { AbstractPod } from 'cdk8s-plus-30'

new AbstractPod(scope: Construct, id: string, props?: AbstractPodProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

addContainer 
public addContainer(cont: ContainerProps)
contRequired
addHostAlias 
public addHostAlias(hostAlias: HostAlias)
hostAliasRequired
addInitContainer 
public addInitContainer(cont: ContainerProps)
contRequired
addVolume 
public addVolume(vol: Volume)
volRequired
attachContainer 
public attachContainer(cont: Container)
contRequired
toNetworkPolicyPeerConfig 
public toNetworkPolicyPeerConfig()
toPodSelector 
public toPodSelector()
toPodSelectorConfig 
public toPodSelectorConfig()
toSubjectConfiguration 
public toSubjectConfiguration()

Properties

automountServiceAccountTokenRequired 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
containersRequired 
public readonly containers: Container[];
dnsRequired 
public readonly dns: PodDns;
hostAliasesRequired 
public readonly hostAliases: HostAlias[];
initContainersRequired 
public readonly initContainers: Container[];
podMetadataRequired 
public readonly podMetadata: ApiObjectMetadataDefinition;
securityContextRequired 
public readonly securityContext: PodSecurityContext;
volumesRequired 
public readonly volumes: Volume[];
dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;
hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;
serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;
terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

AwsElasticBlockStorePersistentVolume

Represents an AWS Disk resource that is attached to a kubelet’s host machine and then exposed to the pod.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

Initializers 

import { AwsElasticBlockStorePersistentVolume } from 'cdk8s-plus-30'

new AwsElasticBlockStorePersistentVolume(scope: Construct, id: string, props: AwsElasticBlockStorePersistentVolumeProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Properties

fsTypeRequired 
public readonly fsType: string;
  • Type: string

File system type of this volume.

readOnlyRequired 
public readonly readOnly: boolean;
  • Type: boolean

Whether or not it is mounted as a read-only volume.

volumeIdRequired 
public readonly volumeId: string;
  • Type: string

Volume id of this volume.

partitionOptional 
public readonly partition: number;
  • Type: number

Partition of this volume.

AzureDiskPersistentVolume

AzureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.

Initializers 

import { AzureDiskPersistentVolume } from 'cdk8s-plus-30'

new AzureDiskPersistentVolume(scope: Construct, id: string, props: AzureDiskPersistentVolumeProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Properties

azureKindRequired 
public readonly azureKind: AzureDiskPersistentVolumeKind;

Azure kind of this volume.

cachingModeRequired 
public readonly cachingMode: AzureDiskPersistentVolumeCachingMode;

Caching mode of this volume.

diskNameRequired 
public readonly diskName: string;
  • Type: string

Disk name of this volume.

diskUriRequired 
public readonly diskUri: string;
  • Type: string

Disk URI of this volume.

fsTypeRequired 
public readonly fsType: string;
  • Type: string

File system type of this volume.

readOnlyRequired 
public readonly readOnly: boolean;
  • Type: boolean

Whether or not it is mounted as a read-only volume.

BasicAuthSecret

Create a secret for basic authentication.

https://kubernetes.io/docs/concepts/configuration/secret/#basic-authentication-secret

Initializers 

import { BasicAuthSecret } from 'cdk8s-plus-30'

new BasicAuthSecret(scope: Construct, id: string, props: BasicAuthSecretProps)
scopeRequired
idRequired
  • Type: string
propsRequired

ClusterRole

ClusterRole is a cluster level, logical grouping of PolicyRules that can be referenced as a unit by a RoleBinding or ClusterRoleBinding.

Initializers 

import { ClusterRole } from 'cdk8s-plus-30'

new ClusterRole(scope: Construct, id: string, props?: ClusterRoleProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

aggregate 
public aggregate(key: string, value: string)
keyRequired
  • Type: string
valueRequired
  • Type: string
allow 
public allow(verbs: string[], endpoints: IApiEndpoint)
verbsRequired
  • Type: string[]
endpointsRequired

The endpoints(s) to apply to.

allowCreate 
public allowCreate(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowDelete 
public allowDelete(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowDeleteCollection 
public allowDeleteCollection(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowGet 
public allowGet(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowList 
public allowList(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowPatch 
public allowPatch(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowRead 
public allowRead(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowReadWrite 
public allowReadWrite(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowUpdate 
public allowUpdate(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

allowWatch 
public allowWatch(endpoints: IApiEndpoint)
endpointsRequired

The resource(s) to apply to.

bind 
public bind(subjects: ISubject)
subjectsRequired

a list of subjects to bind to.

bindInNamespace 
public bindInNamespace(namespace: string, subjects: ISubject)
namespaceRequired
  • Type: string

the namespace to limit permissions to.

subjectsRequired

a list of subjects to bind to.

combine 
public combine(rol: ClusterRole)
rolRequired

Static Functions

fromClusterRoleName 
import { ClusterRole } from 'cdk8s-plus-30'

ClusterRole.fromClusterRoleName(scope: Construct, id: string, name: string)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

rulesRequired 
public readonly rules: ClusterRolePolicyRule[];

Rules associaated with this Role.

Returns a copy, use allow to add rules.

ClusterRoleBinding

A ClusterRoleBinding grants permissions cluster-wide to a user or set of users.

Initializers 

import { ClusterRoleBinding } from 'cdk8s-plus-30'

new ClusterRoleBinding(scope: Construct, id: string, props: ClusterRoleBindingProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Methods

addSubjects 
public addSubjects(subjects: ISubject)
subjectsRequired

The subjects to add.

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

roleRequired 
public readonly role: IClusterRole;
subjectsRequired 
public readonly subjects: ISubject[];

ConfigMap

ConfigMap holds configuration data for pods to consume.

Initializers 

import { ConfigMap } from 'cdk8s-plus-30'

new ConfigMap(scope: Construct, id: string, props?: ConfigMapProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

addBinaryData 
public addBinaryData(key: string, value: string)
keyRequired
  • Type: string

The key.

valueRequired
  • Type: string

The value.

addData 
public addData(key: string, value: string)
keyRequired
  • Type: string

The key.

valueRequired
  • Type: string

The value.

addDirectory 
public addDirectory(localDir: string, options?: AddDirectoryOptions)
localDirRequired
  • Type: string

A path to a local directory.

optionsOptional

Options.

addFile 
public addFile(localFile: string, key?: string)
localFileRequired
  • Type: string

The path to the local file.

keyOptional
  • Type: string

The ConfigMap key (default to the file name).

Static Functions

fromConfigMapName 
import { ConfigMap } from 'cdk8s-plus-30'

ConfigMap.fromConfigMapName(scope: Construct, id: string, name: string)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string

Properties

binaryDataRequired 
public readonly binaryData: {[ key: string ]: string};
  • Type: {[ key: string ]: string}

The binary data associated with this config map.

Returns a copy. To add data records, use addBinaryData() or addData().

dataRequired 
public readonly data: {[ key: string ]: string};
  • Type: {[ key: string ]: string}

The data associated with this config map.

Returns an copy. To add data records, use addData() or addBinaryData().

immutableRequired 
public readonly immutable: boolean;
  • Type: boolean

Whether or not this config map is immutable.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

CronJob

A CronJob is responsible for creating a Job and scheduling it based on provided cron schedule.

This helps running Jobs in a recurring manner.

Initializers 

import { CronJob } from 'cdk8s-plus-30'

new CronJob(scope: Construct, id: string, props: CronJobProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Properties

concurrencyPolicyRequired 
public readonly concurrencyPolicy: string;
  • Type: string

The policy used by this cron job to determine the concurrency mode in which to schedule jobs.

failedJobsRetainedRequired 
public readonly failedJobsRetained: number;
  • Type: number

The number of failed jobs retained by this cron job.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

Represents the resource type.

scheduleRequired 
public readonly schedule: Cron;

The schedule this cron job is scheduled to run in.

startingDeadlineRequired 
public readonly startingDeadline: Duration;

The time by which the running cron job needs to schedule the next job execution.

The job is considered as failed if it misses this deadline.

successfulJobsRetainedRequired 
public readonly successfulJobsRetained: number;
  • Type: number

The number of successful jobs retained by this cron job.

suspendRequired 
public readonly suspend: boolean;
  • Type: boolean

Whether or not the cron job is currently suspended or not.

timeZoneOptional 
public readonly timeZone: string;
  • Type: string

The timezone which this cron job would follow to schedule jobs.

DaemonSet

A DaemonSet ensures that all (or some) Nodes run a copy of a Pod.

As nodes are added to the cluster, Pods are added to them. As nodes are removed from the cluster, those Pods are garbage collected. Deleting a DaemonSet will clean up the Pods it created.

Some typical uses of a DaemonSet are:

  • running a cluster storage daemon on every node
  • running a logs collection daemon on every node
  • running a node monitoring daemon on every node

In a simple case, one DaemonSet, covering all nodes, would be used for each type of daemon. A more complex setup might use multiple DaemonSets for a single type of daemon, but with different flags and/or different memory and cpu requests for different hardware types.

Initializers 

import { DaemonSet } from 'cdk8s-plus-30'

new DaemonSet(scope: Construct, id: string, props?: DaemonSetProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Properties

minReadySecondsRequired 
public readonly minReadySeconds: number;
  • Type: number
resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

Deployment

A Deployment provides declarative updates for Pods and ReplicaSets.

You describe a desired state in a Deployment, and the Deployment Controller changes the actual state to the desired state at a controlled rate. You can define Deployments to create new ReplicaSets, or to remove existing Deployments and adopt all their resources with new Deployments.

Note: Do not manage ReplicaSets owned by a Deployment. Consider opening an issue in the main Kubernetes repository if your use case is not covered below.

Use Case

The following are typical use cases for Deployments:

  • Create a Deployment to rollout a ReplicaSet. The ReplicaSet creates Pods in the background. Check the status of the rollout to see if it succeeds or not.
  • Declare the new state of the Pods by updating the PodTemplateSpec of the Deployment. A new ReplicaSet is created and the Deployment manages moving the Pods from the old ReplicaSet to the new one at a controlled rate. Each new ReplicaSet updates the revision of the Deployment.
  • Rollback to an earlier Deployment revision if the current state of the Deployment is not stable. Each rollback updates the revision of the Deployment.
  • Scale up the Deployment to facilitate more load.
  • Pause the Deployment to apply multiple fixes to its PodTemplateSpec and then resume it to start a new rollout.
  • Use the status of the Deployment as an indicator that a rollout has stuck.
  • Clean up older ReplicaSets that you don’t need anymore.

Initializers 

import { Deployment } from 'cdk8s-plus-30'

new Deployment(scope: Construct, id: string, props?: DeploymentProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

exposeViaIngress 
public exposeViaIngress(path: string, options?: ExposeDeploymentViaIngressOptions)
pathRequired
  • Type: string

The ingress path to register under.

optionsOptional

Additional options.

exposeViaService 
public exposeViaService(options?: DeploymentExposeViaServiceOptions)
optionsOptional

Options to determine details of the service and port exposed.

markHasAutoscaler 
public markHasAutoscaler()
toScalingTarget 
public toScalingTarget()

Properties

minReadyRequired 
public readonly minReady: Duration;

Minimum duration for which a newly created pod should be ready without any of its container crashing, for it to be considered available.

progressDeadlineRequired 
public readonly progressDeadline: Duration;

The maximum duration for a deployment to make progress before it is considered to be failed.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

strategyRequired 
public readonly strategy: DeploymentStrategy;
replicasOptional 
public readonly replicas: number;
  • Type: number

Number of desired pods.

hasAutoscalerRequired 
public readonly hasAutoscaler: boolean;
  • Type: boolean

If this is a target of an autoscaler.

DockerConfigSecret

Create a secret for storing credentials for accessing a container image registry.

https://kubernetes.io/docs/concepts/configuration/secret/#docker-config-secrets

Initializers 

import { DockerConfigSecret } from 'cdk8s-plus-30'

new DockerConfigSecret(scope: Construct, id: string, props: DockerConfigSecretProps)
scopeRequired
idRequired
  • Type: string
propsRequired

GCEPersistentDiskPersistentVolume

GCEPersistentDisk represents a GCE Disk resource that is attached to a kubelet’s host machine and then exposed to the pod.

Provisioned by an admin.

https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk

Initializers 

import { GCEPersistentDiskPersistentVolume } from 'cdk8s-plus-30'

new GCEPersistentDiskPersistentVolume(scope: Construct, id: string, props: GCEPersistentDiskPersistentVolumeProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Properties

fsTypeRequired 
public readonly fsType: string;
  • Type: string

File system type of this volume.

pdNameRequired 
public readonly pdName: string;
  • Type: string

PD resource in GCE of this volume.

readOnlyRequired 
public readonly readOnly: boolean;
  • Type: boolean

Whether or not it is mounted as a read-only volume.

partitionOptional 
public readonly partition: number;
  • Type: number

Partition of this volume.

Group

Represents a group.

Methods

toSubjectConfiguration 
public toSubjectConfiguration()

Static Functions

fromName 
import { Group } from 'cdk8s-plus-30'

Group.fromName(scope: Construct, id: string, name: string)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string

Properties

kindRequired 
public readonly kind: string;
  • Type: string
nameRequired 
public readonly name: string;
  • Type: string
apiGroupOptional 
public readonly apiGroup: string;
  • Type: string

HorizontalPodAutoscaler

A HorizontalPodAutoscaler scales a workload up or down in response to a metric change.

This allows your services to scale up when demand is high and scale down when they are no longer needed.

Typical use cases for HorizontalPodAutoscaler:

  • When Memory usage is above 70%, scale up the number of replicas to meet the demand.
  • When CPU usage is below 30%, scale down the number of replicas to save resources.
  • When a service is experiencing a spike in traffic, scale up the number of replicas to meet the demand. Then, when the traffic subsides, scale down the number of replicas to save resources.

The autoscaler uses the following algorithm to determine the number of replicas to scale:

desiredReplicas = ceil[currentReplicas * ( currentMetricValue / desiredMetricValue )]

HorizontalPodAutoscaler’s can be used to with any Scalable workload: * Deployment * StatefulSet

Targets that already have a replica count defined:

Remove any replica counts from the target resource before associating with a HorizontalPodAutoscaler. If this isn’t done, then any time a change to that object is applied, Kubernetes will scale the current number of Pods to the value of the target.replicas key. This may not be desired and could lead to unexpected behavior.

https://kubernetes.io/docs/tasks/run-application/horizontal-pod-autoscale/#implicit-maintenance-mode-deactivation

Initializers 

import { HorizontalPodAutoscaler } from 'cdk8s-plus-30'

new HorizontalPodAutoscaler(scope: Construct, id: string, props: HorizontalPodAutoscalerProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Properties

maxReplicasRequired 
public readonly maxReplicas: number;
  • Type: number

The maximum number of replicas that can be scaled up to.

minReplicasRequired 
public readonly minReplicas: number;
  • Type: number

The minimum number of replicas that can be scaled down to.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

scaleDownRequired 
public readonly scaleDown: ScalingRules;

The scaling behavior when scaling down.

scaleUpRequired 
public readonly scaleUp: ScalingRules;

The scaling behavior when scaling up.

targetRequired 
public readonly target: IScalable;

The workload to scale up or down.

metricsOptional 
public readonly metrics: Metric[];

The metric conditions that trigger a scale up or scale down.

Ingress

Ingress is a collection of rules that allow inbound connections to reach the endpoints defined by a backend.

An Ingress can be configured to give services externally-reachable urls, load balance traffic, terminate SSL, offer name based virtual hosting etc.

Initializers 

import { Ingress } from 'cdk8s-plus-30'

new Ingress(scope: Construct, id: string, props?: IngressProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

addDefaultBackend 
public addDefaultBackend(backend: IngressBackend)
backendRequired

The backend to use for requests that do not match any rule.

addHostDefaultBackend 
public addHostDefaultBackend(host: string, backend: IngressBackend)
hostRequired
  • Type: string

The host name to match.

backendRequired

The backend to route to.

addHostRule 
public addHostRule(host: string, path: string, backend: IngressBackend, pathType?: HttpIngressPathType)
hostRequired
  • Type: string

The host name.

pathRequired
  • Type: string

The HTTP path.

backendRequired

The backend to route requests to.

pathTypeOptional

How the path is matched against request paths.

addRule 
public addRule(path: string, backend: IngressBackend, pathType?: HttpIngressPathType)
pathRequired
  • Type: string

The HTTP path.

backendRequired

The backend to route requests to.

pathTypeOptional

How the path is matched against request paths.

addRules 
public addRules(rules: IngressRule)
rulesRequired

The rules to add.

addTls 
public addTls(tls: IngressTls[])
tlsRequired

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

Job

A Job creates one or more Pods and ensures that a specified number of them successfully terminate.

As pods successfully complete, the Job tracks the successful completions. When a specified number of successful completions is reached, the task (ie, Job) is complete. Deleting a Job will clean up the Pods it created. A simple case is to create one Job object in order to reliably run one Pod to completion. The Job object will start a new Pod if the first Pod fails or is deleted (for example due to a node hardware failure or a node reboot). You can also use a Job to run multiple Pods in parallel.

Initializers 

import { Job } from 'cdk8s-plus-30'

new Job(scope: Construct, id: string, props?: JobProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

activeDeadlineOptional 
public readonly activeDeadline: Duration;

Duration before job is terminated.

If undefined, there is no deadline.

backoffLimitOptional 
public readonly backoffLimit: number;
  • Type: number

Number of retries before marking failed.

ttlAfterFinishedOptional 
public readonly ttlAfterFinished: Duration;

TTL before the job is deleted after it is finished.

Namespace

In Kubernetes, namespaces provides a mechanism for isolating groups of resources within a single cluster.

Names of resources need to be unique within a namespace, but not across namespaces. Namespace-based scoping is applicable only for namespaced objects (e.g. Deployments, Services, etc) and not for cluster-wide objects (e.g. StorageClass, Nodes, PersistentVolumes, etc).

Initializers 

import { Namespace } from 'cdk8s-plus-30'

new Namespace(scope: Construct, id: string, props?: NamespaceProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

toNamespaceSelectorConfig 
public toNamespaceSelectorConfig()
toNetworkPolicyPeerConfig 
public toNetworkPolicyPeerConfig()
toPodSelector 
public toPodSelector()

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

Constants

NAME_LABEL
  • Type: string

https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/#automatic-labelling

Namespaces

Represents a group of namespaces.

Initializers 

import { Namespaces } from 'cdk8s-plus-30'

new Namespaces(scope: Construct, id: string, expressions?: LabelExpression[], names?: string[], labels?: {[ key: string ]: string})
scopeRequired
idRequired
  • Type: string
expressionsOptional
namesOptional
  • Type: string[]
labelsOptional
  • Type: {[ key: string ]: string}

Methods

toNamespaceSelectorConfig 
public toNamespaceSelectorConfig()
toNetworkPolicyPeerConfig 
public toNetworkPolicyPeerConfig()
toPodSelector 
public toPodSelector()

Static Functions

all 
import { Namespaces } from 'cdk8s-plus-30'

Namespaces.all(scope: Construct, id: string)
scopeRequired
idRequired
  • Type: string
select 
import { Namespaces } from 'cdk8s-plus-30'

Namespaces.select(scope: Construct, id: string, options: NamespacesSelectOptions)
scopeRequired
idRequired
  • Type: string
optionsRequired

NetworkPolicy

Control traffic flow at the IP address or port level (OSI layer 3 or 4), network policies are an application-centric construct which allow you to specify how a pod is allowed to communicate with various network peers.

Outgoing traffic is allowed if there are no network policies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the network policies that select the pod.

  • Incoming traffic is allowed to a pod if there are no network policies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod’s local node, OR if the traffic matches at least one ingress rule across all of the network policies that select the pod.

Network policies do not conflict; they are additive. If any policy or policies apply to a given pod for a given direction, the connections allowed in that direction from that pod is the union of what the applicable policies allow. Thus, order of evaluation does not affect the policy result.

For a connection from a source pod to a destination pod to be allowed, both the egress policy on the source pod and the ingress policy on the destination pod need to allow the connection. If either side does not allow the connection, it will not happen.

https://kubernetes.io/docs/concepts/services-networking/network-policies/#networkpolicy-resource

Initializers 

import { NetworkPolicy } from 'cdk8s-plus-30'

new NetworkPolicy(scope: Construct, id: string, props?: NetworkPolicyProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

addEgressRule 
public addEgressRule(peer: INetworkPolicyPeer, ports?: NetworkPolicyPort[])
peerRequired
portsOptional
addIngressRule 
public addIngressRule(peer: INetworkPolicyPeer, ports?: NetworkPolicyPort[])
peerRequired
portsOptional

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

NetworkPolicyIpBlock

Describes a particular CIDR (Ex.

“192.168.1.1/24”,”2001:db9::/64”) that is allowed to the pods matched by a network policy selector. The except entry describes CIDRs that should not be included within this rule.

Methods

toNetworkPolicyPeerConfig 
public toNetworkPolicyPeerConfig()
toPodSelector 
public toPodSelector()

Static Functions

anyIpv4 
import { NetworkPolicyIpBlock } from 'cdk8s-plus-30'

NetworkPolicyIpBlock.anyIpv4(scope: Construct, id: string)
scopeRequired
idRequired
  • Type: string
anyIpv6 
import { NetworkPolicyIpBlock } from 'cdk8s-plus-30'

NetworkPolicyIpBlock.anyIpv6(scope: Construct, id: string)
scopeRequired
idRequired
  • Type: string
ipv4 
import { NetworkPolicyIpBlock } from 'cdk8s-plus-30'

NetworkPolicyIpBlock.ipv4(scope: Construct, id: string, cidrIp: string, except?: string[])
scopeRequired
idRequired
  • Type: string
cidrIpRequired
  • Type: string
exceptOptional
  • Type: string[]
ipv6 
import { NetworkPolicyIpBlock } from 'cdk8s-plus-30'

NetworkPolicyIpBlock.ipv6(scope: Construct, id: string, cidrIp: string, except?: string[])
scopeRequired
idRequired
  • Type: string
cidrIpRequired
  • Type: string
exceptOptional
  • Type: string[]

Properties

cidrRequired 
public readonly cidr: string;
  • Type: string

A string representing the IP Block Valid examples are “192.168.1.1/24” or “2001:db9::/64”.

exceptOptional 
public readonly except: string[];
  • Type: string[]

A slice of CIDRs that should not be included within an IP Block Valid examples are “192.168.1.1/24” or “2001:db9::/64”. Except values will be rejected if they are outside the CIDR range.

PersistentVolume

A PersistentVolume (PV) is a piece of storage in the cluster that has been provisioned by an administrator or dynamically provisioned using Storage Classes.

It is a resource in the cluster just like a node is a cluster resource. PVs are volume plugins like Volumes, but have a lifecycle independent of any individual Pod that uses the PV. This API object captures the details of the implementation of the storage, be that NFS, iSCSI, or a cloud-provider-specific storage system.

Initializers 

import { PersistentVolume } from 'cdk8s-plus-30'

new PersistentVolume(scope: Construct, id: string, props?: PersistentVolumeProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

asVolume 
public asVolume()
bind 
public bind(claim: IPersistentVolumeClaim)
claimRequired

The PVC to bind to.

reserve 
public reserve()

Static Functions

fromPersistentVolumeName 
import { PersistentVolume } from 'cdk8s-plus-30'

PersistentVolume.fromPersistentVolumeName(scope: Construct, id: string, volumeName: string)
scopeRequired
idRequired
  • Type: string
volumeNameRequired
  • Type: string

Properties

modeRequired 
public readonly mode: PersistentVolumeMode;

Volume mode of this volume.

reclaimPolicyRequired 
public readonly reclaimPolicy: PersistentVolumeReclaimPolicy;

Reclaim policy of this volume.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

accessModesOptional 
public readonly accessModes: PersistentVolumeAccessMode[];

Access modes requirement of this claim.

claimOptional 
public readonly claim: IPersistentVolumeClaim;

PVC this volume is bound to.

Undefined means this volume is not yet claimed by any PVC.

mountOptionsOptional 
public readonly mountOptions: string[];
  • Type: string[]

Mount options of this volume.

storageOptional 
public readonly storage: Size;

Storage size of this volume.

storageClassNameOptional 
public readonly storageClassName: string;
  • Type: string

Storage class this volume belongs to.

PersistentVolumeClaim

A PersistentVolumeClaim (PVC) is a request for storage by a user.

It is similar to a Pod. Pods consume node resources and PVCs consume PV resources. Pods can request specific levels of resources (CPU and Memory). Claims can request specific size and access modes

Initializers 

import { PersistentVolumeClaim } from 'cdk8s-plus-30'

new PersistentVolumeClaim(scope: Construct, id: string, props?: PersistentVolumeClaimProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

bind 
public bind(vol: IPersistentVolume)
volRequired

The PV to bind to.

Static Functions

fromClaimName 
import { PersistentVolumeClaim } from 'cdk8s-plus-30'

PersistentVolumeClaim.fromClaimName(scope: Construct, id: string, claimName: string)
scopeRequired
idRequired
  • Type: string
claimNameRequired
  • Type: string

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

volumeModeRequired 
public readonly volumeMode: PersistentVolumeMode;

Volume mode requirement of this claim.

accessModesOptional 
public readonly accessModes: PersistentVolumeAccessMode[];

Access modes requirement of this claim.

storageOptional 
public readonly storage: Size;

Storage requirement of this claim.

storageClassNameOptional 
public readonly storageClassName: string;
  • Type: string

Storage class requirment of this claim.

volumeOptional 
public readonly volume: IPersistentVolume;

PV this claim is bound to.

Undefined means the claim is not bound to any specific volume.

Pod

Pod is a collection of containers that can run on a host.

This resource is created by clients and scheduled onto hosts.

Initializers 

import { Pod } from 'cdk8s-plus-30'

new Pod(scope: Construct, id: string, props?: PodProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Properties

connectionsRequired 
public readonly connections: PodConnections;
podMetadataRequired 
public readonly podMetadata: ApiObjectMetadataDefinition;
resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

schedulingRequired 
public readonly scheduling: PodScheduling;

Constants

ADDRESS_LABEL
  • Type: string

This label is autoamtically added by cdk8s to any pod.

It provides a unique and stable identifier for the pod.

Pods

Represents a group of pods.

Initializers 

import { Pods } from 'cdk8s-plus-30'

new Pods(scope: Construct, id: string, expressions?: LabelExpression[], labels?: {[ key: string ]: string}, namespaces?: INamespaceSelector)
scopeRequired
idRequired
  • Type: string
expressionsOptional
labelsOptional
  • Type: {[ key: string ]: string}
namespacesOptional

Methods

toNetworkPolicyPeerConfig 
public toNetworkPolicyPeerConfig()
toPodSelector 
public toPodSelector()
toPodSelectorConfig 
public toPodSelectorConfig()

Static Functions

all 
import { Pods } from 'cdk8s-plus-30'

Pods.all(scope: Construct, id: string, options?: PodsAllOptions)
scopeRequired
idRequired
  • Type: string
optionsOptional
select 
import { Pods } from 'cdk8s-plus-30'

Pods.select(scope: Construct, id: string, options: PodsSelectOptions)
scopeRequired
idRequired
  • Type: string
optionsRequired

Resource

Base class for all Kubernetes objects in stdk8s.

Represents a single resource.

Initializers 

import { Resource } from 'cdk8s-plus-30'

new Resource(scope: Construct, id: string)
scopeRequired
idRequired
  • Type: string

Methods

asApiResource 
public asApiResource()
asNonApiResource 
public asNonApiResource()

Properties

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. “authorization.k8s.io”).

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

metadataRequired 
public readonly metadata: ApiObjectMetadataDefinition;
nameRequired 
public readonly name: string;
  • Type: string

The name of this API object.

permissionsRequired 
public readonly permissions: ResourcePermissions;
resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

Role

Role is a namespaced, logical grouping of PolicyRules that can be referenced as a unit by a RoleBinding.

Initializers 

import { Role } from 'cdk8s-plus-30'

new Role(scope: Construct, id: string, props?: RoleProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

allow 
public allow(verbs: string[], resources: IApiResource)
verbsRequired
  • Type: string[]
resourcesRequired

The resource(s) to apply to.

allowCreate 
public allowCreate(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowDelete 
public allowDelete(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowDeleteCollection 
public allowDeleteCollection(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowGet 
public allowGet(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowList 
public allowList(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowPatch 
public allowPatch(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowRead 
public allowRead(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowReadWrite 
public allowReadWrite(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowUpdate 
public allowUpdate(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

allowWatch 
public allowWatch(resources: IApiResource)
resourcesRequired

The resource(s) to apply to.

bind 
public bind(subjects: ISubject)
subjectsRequired

a list of subjects to bind to.

Static Functions

fromRoleName 
import { Role } from 'cdk8s-plus-30'

Role.fromRoleName(scope: Construct, id: string, name: string)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

rulesRequired 
public readonly rules: RolePolicyRule[];

Rules associaated with this Role.

Returns a copy, use allow to add rules.

RoleBinding

A RoleBinding grants permissions within a specific namespace to a user or set of users.

Initializers 

import { RoleBinding } from 'cdk8s-plus-30'

new RoleBinding(scope: Construct, id: string, props: RoleBindingProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Methods

addSubjects 
public addSubjects(subjects: ISubject)
subjectsRequired

The subjects to add.

Properties

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

roleRequired 
public readonly role: IRole;
subjectsRequired 
public readonly subjects: ISubject[];

Secret

Kubernetes Secrets let you store and manage sensitive information, such as passwords, OAuth tokens, and ssh keys.

Storing confidential information in a Secret is safer and more flexible than putting it verbatim in a Pod definition or in a container image.

https://kubernetes.io/docs/concepts/configuration/secret

Initializers 

import { Secret } from 'cdk8s-plus-30'

new Secret(scope: Construct, id: string, props?: SecretProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

addStringData 
public addStringData(key: string, value: string)
keyRequired
  • Type: string

Key.

valueRequired
  • Type: string

Value.

envValue 
public envValue(key: string, options?: EnvValueFromSecretOptions)
keyRequired
  • Type: string
optionsOptional
getStringData 
public getStringData(key: string)
keyRequired
  • Type: string

Key.

Static Functions

fromSecretName 
import { Secret } from 'cdk8s-plus-30'

Secret.fromSecretName(scope: Construct, id: string, name: string)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string

Properties

immutableRequired 
public readonly immutable: boolean;
  • Type: boolean

Whether or not the secret is immutable.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

Service

An abstract way to expose an application running on a set of Pods as a network service.

With Kubernetes you don’t need to modify your application to use an unfamiliar service discovery mechanism. Kubernetes gives Pods their own IP addresses and a single DNS name for a set of Pods, and can load-balance across them.

For example, consider a stateless image-processing backend which is running with 3 replicas. Those replicas are fungible—frontends do not care which backend they use. While the actual Pods that compose the backend set may change, the frontend clients should not need to be aware of that, nor should they need to keep track of the set of backends themselves. The Service abstraction enables this decoupling.

If you’re able to use Kubernetes APIs for service discovery in your application, you can query the API server for Endpoints, that get updated whenever the set of Pods in a Service changes. For non-native applications, Kubernetes offers ways to place a network port or load balancer in between your application and the backend Pods.

Initializers 

import { Service } from 'cdk8s-plus-30'

new Service(scope: Construct, id: string, props?: ServiceProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

bind 
public bind(port: number, options?: ServiceBindOptions)
portRequired
  • Type: number

The port definition.

optionsOptional
exposeViaIngress 
public exposeViaIngress(path: string, options?: ExposeServiceViaIngressOptions)
pathRequired
  • Type: string

The path to expose the service under.

optionsOptional

Additional options.

select 
public select(selector: IPodSelector)
selectorRequired
selectLabel 
public selectLabel(key: string, value: string)
keyRequired
  • Type: string
valueRequired
  • Type: string

Properties

portRequired 
public readonly port: number;
  • Type: number

Return the first port of the service.

portsRequired 
public readonly ports: ServicePort[];

Ports for this service.

Use bind() to bind additional service ports.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

typeRequired 
public readonly type: ServiceType;

Determines how the Service is exposed.

clusterIPOptional 
public readonly clusterIP: string;
  • Type: string

The IP address of the service and is usually assigned randomly by the master.

externalNameOptional 
public readonly externalName: string;
  • Type: string

The externalName to be used for EXTERNAL_NAME types.

ServiceAccount

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account

Initializers 

import { ServiceAccount } from 'cdk8s-plus-30'

new ServiceAccount(scope: Construct, id: string, props?: ServiceAccountProps)
scopeRequired
idRequired
  • Type: string
propsOptional

Methods

addSecret 
public addSecret(secr: ISecret)
secrRequired

The secret.

toSubjectConfiguration 
public toSubjectConfiguration()

Static Functions

fromServiceAccountName 
import { ServiceAccount } from 'cdk8s-plus-30'

ServiceAccount.fromServiceAccountName(scope: Construct, id: string, name: string, options?: FromServiceAccountNameOptions)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string

The name of the service account resource.

optionsOptional

additional options.

Properties

automountTokenRequired 
public readonly automountToken: boolean;
  • Type: boolean

Whether or not a token is automatically mounted for this service account.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

secretsRequired 
public readonly secrets: ISecret[];

List of secrets allowed to be used by pods running using this service account.

Returns a copy. To add a secret, use addSecret().

ServiceAccountTokenSecret

Create a secret for a service account token.

https://kubernetes.io/docs/concepts/configuration/secret/#service-account-token-secrets

Initializers 

import { ServiceAccountTokenSecret } from 'cdk8s-plus-30'

new ServiceAccountTokenSecret(scope: Construct, id: string, props: ServiceAccountTokenSecretProps)
scopeRequired
idRequired
  • Type: string
propsRequired

SshAuthSecret

Create a secret for ssh authentication.

https://kubernetes.io/docs/concepts/configuration/secret/#ssh-authentication-secrets

Initializers 

import { SshAuthSecret } from 'cdk8s-plus-30'

new SshAuthSecret(scope: Construct, id: string, props: SshAuthSecretProps)
scopeRequired
idRequired
  • Type: string
propsRequired

StatefulSet

StatefulSet is the workload API object used to manage stateful applications.

Manages the deployment and scaling of a set of Pods, and provides guarantees about the ordering and uniqueness of these Pods.

Like a Deployment, a StatefulSet manages Pods that are based on an identical container spec. Unlike a Deployment, a StatefulSet maintains a sticky identity for each of their Pods. These pods are created from the same spec, but are not interchangeable: each has a persistent identifier that it maintains across any rescheduling.

If you want to use storage volumes to provide persistence for your workload, you can use a StatefulSet as part of the solution. Although individual Pods in a StatefulSet are susceptible to failure, the persistent Pod identifiers make it easier to match existing volumes to the new Pods that replace any that have failed.

Using StatefulSets

StatefulSets are valuable for applications that require one or more of the following.

  • Stable, unique network identifiers.
  • Stable, persistent storage.
  • Ordered, graceful deployment and scaling.
  • Ordered, automated rolling updates.

Initializers 

import { StatefulSet } from 'cdk8s-plus-30'

new StatefulSet(scope: Construct, id: string, props: StatefulSetProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Methods

markHasAutoscaler 
public markHasAutoscaler()
toScalingTarget 
public toScalingTarget()

Properties

minReadyRequired 
public readonly minReady: Duration;

Minimum duration for which a newly created pod should be ready without any of its container crashing, for it to be considered available.

podManagementPolicyRequired 
public readonly podManagementPolicy: PodManagementPolicy;

Management policy to use for the set.

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

serviceRequired 
public readonly service: Service;
strategyRequired 
public readonly strategy: StatefulSetUpdateStrategy;

The update startegy of this stateful set.

replicasOptional 
public readonly replicas: number;
  • Type: number

Number of desired pods.

hasAutoscalerRequired 
public readonly hasAutoscaler: boolean;
  • Type: boolean

If this is a target of an autoscaler.

TlsSecret

Create a secret for storing a TLS certificate and its associated key.

https://kubernetes.io/docs/concepts/configuration/secret/#tls-secrets

Initializers 

import { TlsSecret } from 'cdk8s-plus-30'

new TlsSecret(scope: Construct, id: string, props: TlsSecretProps)
scopeRequired
idRequired
  • Type: string
propsRequired

User

Represents a user.

Methods

toSubjectConfiguration 
public toSubjectConfiguration()

Static Functions

fromName 
import { User } from 'cdk8s-plus-30'

User.fromName(scope: Construct, id: string, name: string)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string

Properties

kindRequired 
public readonly kind: string;
  • Type: string
nameRequired 
public readonly name: string;
  • Type: string
apiGroupOptional 
public readonly apiGroup: string;
  • Type: string

Volume

Volume represents a named volume in a pod that may be accessed by any container in the pod.

Docker also has a concept of volumes, though it is somewhat looser and less managed. In Docker, a volume is simply a directory on disk or in another Container. Lifetimes are not managed and until very recently there were only local-disk-backed volumes. Docker now provides volume drivers, but the functionality is very limited for now (e.g. as of Docker 1.7 only one volume driver is allowed per Container and there is no way to pass parameters to volumes).

A Kubernetes volume, on the other hand, has an explicit lifetime - the same as the Pod that encloses it. Consequently, a volume outlives any Containers that run within the Pod, and data is preserved across Container restarts. Of course, when a Pod ceases to exist, the volume will cease to exist, too. Perhaps more importantly than this, Kubernetes supports many types of volumes, and a Pod can use any number of them simultaneously.

At its core, a volume is just a directory, possibly with some data in it, which is accessible to the Containers in a Pod. How that directory comes to be, the medium that backs it, and the contents of it are determined by the particular volume type used.

To use a volume, a Pod specifies what volumes to provide for the Pod (the .spec.volumes field) and where to mount those into Containers (the .spec.containers[*].volumeMounts field).

A process in a container sees a filesystem view composed from their Docker image and volumes. The Docker image is at the root of the filesystem hierarchy, and any volumes are mounted at the specified paths within the image. Volumes can not mount onto other volumes

Methods

asVolume 
public asVolume()

Static Functions

fromAwsElasticBlockStore 
import { Volume } from 'cdk8s-plus-30'

Volume.fromAwsElasticBlockStore(scope: Construct, id: string, volumeId: string, options?: AwsElasticBlockStoreVolumeOptions)
scopeRequired
idRequired
  • Type: string
volumeIdRequired
  • Type: string
optionsOptional
fromAzureDisk 
import { Volume } from 'cdk8s-plus-30'

Volume.fromAzureDisk(scope: Construct, id: string, diskName: string, diskUri: string, options?: AzureDiskVolumeOptions)
scopeRequired
idRequired
  • Type: string
diskNameRequired
  • Type: string
diskUriRequired
  • Type: string
optionsOptional
fromConfigMap 
import { Volume } from 'cdk8s-plus-30'

Volume.fromConfigMap(scope: Construct, id: string, configMap: IConfigMap, options?: ConfigMapVolumeOptions)
scopeRequired
idRequired
  • Type: string
configMapRequired

The config map to use to populate the volume.

optionsOptional

Options.

fromCsi 
import { Volume } from 'cdk8s-plus-30'

Volume.fromCsi(scope: Construct, id: string, driver: string, options?: CsiVolumeOptions)
scopeRequired
idRequired
  • Type: string
driverRequired
  • Type: string

The name of the CSI driver to use to populate the volume.

optionsOptional

Options for the CSI volume, including driver-specific ones.

fromEmptyDir 
import { Volume } from 'cdk8s-plus-30'

Volume.fromEmptyDir(scope: Construct, id: string, name: string, options?: EmptyDirVolumeOptions)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string
optionsOptional

Additional options.

fromGcePersistentDisk 
import { Volume } from 'cdk8s-plus-30'

Volume.fromGcePersistentDisk(scope: Construct, id: string, pdName: string, options?: GCEPersistentDiskVolumeOptions)
scopeRequired
idRequired
  • Type: string
pdNameRequired
  • Type: string
optionsOptional
fromHostPath 
import { Volume } from 'cdk8s-plus-30'

Volume.fromHostPath(scope: Construct, id: string, name: string, options: HostPathVolumeOptions)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string
optionsRequired
fromNfs 
import { Volume } from 'cdk8s-plus-30'

Volume.fromNfs(scope: Construct, id: string, name: string, options: NfsVolumeOptions)
scopeRequired
idRequired
  • Type: string
nameRequired
  • Type: string
optionsRequired
fromPersistentVolumeClaim 
import { Volume } from 'cdk8s-plus-30'

Volume.fromPersistentVolumeClaim(scope: Construct, id: string, claim: IPersistentVolumeClaim, options?: PersistentVolumeClaimVolumeOptions)
scopeRequired
idRequired
  • Type: string
claimRequired
optionsOptional
fromSecret 
import { Volume } from 'cdk8s-plus-30'

Volume.fromSecret(scope: Construct, id: string, secr: ISecret, options?: SecretVolumeOptions)
scopeRequired
idRequired
  • Type: string
secrRequired

The secret to use to populate the volume.

optionsOptional

Options.

Properties

nameRequired 
public readonly name: string;
  • Type: string

Workload

A workload is an application running on Kubernetes.

Whether your workload is a single component or several that work together, on Kubernetes you run it inside a set of pods. In Kubernetes, a Pod represents a set of running containers on your cluster.

Initializers 

import { Workload } from 'cdk8s-plus-30'

new Workload(scope: Construct, id: string, props: WorkloadProps)
scopeRequired
idRequired
  • Type: string
propsRequired

Methods

select 
public select(selectors: LabelSelector)
selectorsRequired

Properties

connectionsRequired 
public readonly connections: PodConnections;
matchExpressionsRequired 
public readonly matchExpressions: LabelSelectorRequirement[];

The expression matchers this workload will use in order to select pods.

Returns a a copy. Use select() to add expression matchers.

matchLabelsRequired 
public readonly matchLabels: {[ key: string ]: string};
  • Type: {[ key: string ]: string}

The label matchers this workload will use in order to select pods.

Returns a a copy. Use select() to add label matchers.

podMetadataRequired 
public readonly podMetadata: ApiObjectMetadataDefinition;

The metadata of pods in this workload.

schedulingRequired 
public readonly scheduling: WorkloadScheduling;

Structs

AbstractPodProps

Properties for AbstractPod.

Initializer 

import { AbstractPodProps } from 'cdk8s-plus-30'

const abstractPodProps: AbstractPodProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountServiceAccountTokenOptional 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether a service account token should be automatically mounted.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

containersOptional 
public readonly containers: ContainerProps[];

List of containers belonging to the pod.

Containers cannot currently be added or removed. There must be at least one container in a Pod.

You can add additionnal containers using podSpec.addContainer()

dnsOptional 
public readonly dns: PodDnsProps;

DNS settings for the pod.

https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/

dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;

A secret containing docker credentials for authenticating to a registry.

hostAliasesOptional 
public readonly hostAliases: HostAlias[];

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
  • Default: false

Host network for the pod.

initContainersOptional 
public readonly initContainers: ContainerProps[];

List of initialization containers belonging to the pod.

Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion.

Init containers cannot currently be added ,removed or updated.

https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

isolateOptional 
public readonly isolate: boolean;
  • Type: boolean
  • Default: false

Isolates the pod.

This will prevent any ingress or egress connections to / from this pod. You can however allow explicit connections post instantiation by using the .connections property.

restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;

Restart policy for all containers within the pod.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

securityContextOptional 
public readonly securityContext: PodSecurityContextProps;

SecurityContext holds pod-level security attributes and common container settings.

serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

Grace period until the pod is terminated.

volumesOptional 
public readonly volumes: Volume[];

List of volumes that can be mounted by containers belonging to the pod.

You can also add volumes later using podSpec.addVolume()

https://kubernetes.io/docs/concepts/storage/volumes

AddDeploymentOptions

Options to add a deployment to a service.

Initializer 

import { AddDeploymentOptions } from 'cdk8s-plus-30'

const addDeploymentOptions: AddDeploymentOptions = { ... }
nameOptional 
public readonly name: string;
  • Type: string

The name of this port within the service.

This must be a DNS_LABEL. All ports within a ServiceSpec must have unique names. This maps to the ‘Name’ field in EndpointPort objects. Optional if only one ServicePort is defined on this service.

nodePortOptional 
public readonly nodePort: number;
  • Type: number
  • Default: auto-allocate a port if the ServiceType of this Service requires one.

The port on each node on which this service is exposed when type=NodePort or LoadBalancer.

Usually assigned by the system. If specified, it will be allocated to the service if unused or else creation of the service will fail. Default is to auto-allocate a port if the ServiceType of this Service requires one.

https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport

protocolOptional 
public readonly protocol: Protocol;

The IP protocol for this port.

Supports “TCP”, “UDP”, and “SCTP”. Default is TCP.

targetPortOptional 
public readonly targetPort: number;
  • Type: number
  • Default: The value of port will be used.

The port number the service will redirect to.

portOptional 
public readonly port: number;
  • Type: number
  • Default: Copied from the first container of the deployment.

The port number the service will bind to.

AddDirectoryOptions

Options for configmap.addDirectory().

Initializer 

import { AddDirectoryOptions } from 'cdk8s-plus-30'

const addDirectoryOptions: AddDirectoryOptions = { ... }
excludeOptional 
public readonly exclude: string[];
  • Type: string[]
  • Default: include all files

Glob patterns to exclude when adding files.

keyPrefixOptional 
public readonly keyPrefix: string;
  • Type: string
  • Default: “”

A prefix to add to all keys in the config map.

ApiResourceOptions

Options for ApiResource.

Initializer 

import { ApiResourceOptions } from 'cdk8s-plus-30'

const apiResourceOptions: ApiResourceOptions = { ... }
apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of the resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

AwsElasticBlockStorePersistentVolumeProps

Properties for AwsElasticBlockStorePersistentVolume.

Initializer 

import { AwsElasticBlockStorePersistentVolumeProps } from 'cdk8s-plus-30'

const awsElasticBlockStorePersistentVolumeProps: AwsElasticBlockStorePersistentVolumeProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

accessModesOptional 
public readonly accessModes: PersistentVolumeAccessMode[];

Contains all ways the volume can be mounted.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes

claimOptional 
public readonly claim: IPersistentVolumeClaim;

Part of a bi-directional binding between PersistentVolume and PersistentVolumeClaim.

Expected to be non-nil when bound.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#binding

mountOptionsOptional 
public readonly mountOptions: string[];
  • Type: string[]
  • Default: No options.

A list of mount options, e.g. [“ro”, “soft”]. Not validated - mount will simply fail if one is invalid.

https://kubernetes.io/docs/concepts/storage/persistent-volumes/#mount-options

reclaimPolicyOptional 
public readonly reclaimPolicy: PersistentVolumeReclaimPolicy;

When a user is done with their volume, they can delete the PVC objects from the API that allows reclamation of the resource.

The reclaim policy tells the cluster what to do with the volume after it has been released of its claim.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#reclaiming

storageOptional 
public readonly storage: Size;

What is the storage capacity of this volume.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources

storageClassNameOptional 
public readonly storageClassName: string;
  • Type: string
  • Default: Volume does not belong to any storage class.

Name of StorageClass to which this persistent volume belongs.

volumeModeOptional 
public readonly volumeMode: PersistentVolumeMode;

Defines what type of volume is required by the claim.

volumeIdRequired 
public readonly volumeId: string;
  • Type: string

Unique ID of the persistent disk resource in AWS (Amazon EBS volume).

More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

fsTypeOptional 
public readonly fsType: string;
  • Type: string
  • Default: ‘ext4’

Filesystem type of the volume that you want to mount.

Tip: Ensure that the filesystem type is supported by the host operating system.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

partitionOptional 
public readonly partition: number;
  • Type: number
  • Default: No partition.

The partition in the volume that you want to mount.

If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as “1”. Similarly, the volume partition for /dev/sda is “0” (or you can leave the property empty).

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Specify “true” to force and set the ReadOnly property in VolumeMounts to “true”.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

AwsElasticBlockStoreVolumeOptions

Options of Volume.fromAwsElasticBlockStore.

Initializer 

import { AwsElasticBlockStoreVolumeOptions } from 'cdk8s-plus-30'

const awsElasticBlockStoreVolumeOptions: AwsElasticBlockStoreVolumeOptions = { ... }
fsTypeOptional 
public readonly fsType: string;
  • Type: string
  • Default: ‘ext4’

Filesystem type of the volume that you want to mount.

Tip: Ensure that the filesystem type is supported by the host operating system.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

nameOptional 
public readonly name: string;
  • Type: string
  • Default: auto-generated

The volume name.

partitionOptional 
public readonly partition: number;
  • Type: number
  • Default: No partition.

The partition in the volume that you want to mount.

If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as “1”. Similarly, the volume partition for /dev/sda is “0” (or you can leave the property empty).

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Specify “true” to force and set the ReadOnly property in VolumeMounts to “true”.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

AzureDiskPersistentVolumeProps

Properties for AzureDiskPersistentVolume.

Initializer 

import { AzureDiskPersistentVolumeProps } from 'cdk8s-plus-30'

const azureDiskPersistentVolumeProps: AzureDiskPersistentVolumeProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

accessModesOptional 
public readonly accessModes: PersistentVolumeAccessMode[];

Contains all ways the volume can be mounted.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes

claimOptional 
public readonly claim: IPersistentVolumeClaim;

Part of a bi-directional binding between PersistentVolume and PersistentVolumeClaim.

Expected to be non-nil when bound.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#binding

mountOptionsOptional 
public readonly mountOptions: string[];
  • Type: string[]
  • Default: No options.

A list of mount options, e.g. [“ro”, “soft”]. Not validated - mount will simply fail if one is invalid.

https://kubernetes.io/docs/concepts/storage/persistent-volumes/#mount-options

reclaimPolicyOptional 
public readonly reclaimPolicy: PersistentVolumeReclaimPolicy;

When a user is done with their volume, they can delete the PVC objects from the API that allows reclamation of the resource.

The reclaim policy tells the cluster what to do with the volume after it has been released of its claim.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#reclaiming

storageOptional 
public readonly storage: Size;

What is the storage capacity of this volume.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources

storageClassNameOptional 
public readonly storageClassName: string;
  • Type: string
  • Default: Volume does not belong to any storage class.

Name of StorageClass to which this persistent volume belongs.

volumeModeOptional 
public readonly volumeMode: PersistentVolumeMode;

Defines what type of volume is required by the claim.

diskNameRequired 
public readonly diskName: string;
  • Type: string

The Name of the data disk in the blob storage.

diskUriRequired 
public readonly diskUri: string;
  • Type: string

The URI the data disk in the blob storage.

cachingModeOptional 
public readonly cachingMode: AzureDiskPersistentVolumeCachingMode;

Host Caching mode.

fsTypeOptional 
public readonly fsType: string;
  • Type: string
  • Default: ‘ext4’

Filesystem type to mount.

Must be a filesystem type supported by the host operating system.

kindOptional 
public readonly kind: AzureDiskPersistentVolumeKind;

Kind of disk.

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Force the ReadOnly setting in VolumeMounts.

AzureDiskVolumeOptions

Options of Volume.fromAzureDisk.

Initializer 

import { AzureDiskVolumeOptions } from 'cdk8s-plus-30'

const azureDiskVolumeOptions: AzureDiskVolumeOptions = { ... }
cachingModeOptional 
public readonly cachingMode: AzureDiskPersistentVolumeCachingMode;

Host Caching mode.

fsTypeOptional 
public readonly fsType: string;
  • Type: string
  • Default: ‘ext4’

Filesystem type to mount.

Must be a filesystem type supported by the host operating system.

kindOptional 
public readonly kind: AzureDiskPersistentVolumeKind;

Kind of disk.

nameOptional 
public readonly name: string;
  • Type: string
  • Default: auto-generated

The volume name.

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Force the ReadOnly setting in VolumeMounts.

BasicAuthSecretProps

Options for BasicAuthSecret.

Initializer 

import { BasicAuthSecretProps } from 'cdk8s-plus-30'

const basicAuthSecretProps: BasicAuthSecretProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

immutableOptional 
public readonly immutable: boolean;
  • Type: boolean
  • Default: false

If set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified).

If not set to true, the field can be modified at any time.

passwordRequired 
public readonly password: string;
  • Type: string

The password or token for authentication.

usernameRequired 
public readonly username: string;
  • Type: string

The user name for authentication.

ClusterRoleBindingProps

Properties for ClusterRoleBinding.

Initializer 

import { ClusterRoleBindingProps } from 'cdk8s-plus-30'

const clusterRoleBindingProps: ClusterRoleBindingProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

roleRequired 
public readonly role: IClusterRole;

The role to bind to.

ClusterRolePolicyRule

Policy rule of a `ClusterRole.

Initializer 

import { ClusterRolePolicyRule } from 'cdk8s-plus-30'

const clusterRolePolicyRule: ClusterRolePolicyRule = { ... }
endpointsRequired 
public readonly endpoints: IApiEndpoint[];

Endpoints this rule applies to.

Can be either api resources or non api resources.

verbsRequired 
public readonly verbs: string[];
  • Type: string[]

Verbs to allow.

(e.g [‘get’, ‘watch’])

ClusterRoleProps

Properties for ClusterRole.

Initializer 

import { ClusterRoleProps } from 'cdk8s-plus-30'

const clusterRoleProps: ClusterRoleProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

aggregationLabelsOptional 
public readonly aggregationLabels: {[ key: string ]: string};
  • Type: {[ key: string ]: string}

Specify labels that should be used to locate ClusterRoles, whose rules will be automatically filled into this ClusterRole’s rules.

rulesOptional 
public readonly rules: ClusterRolePolicyRule[];

A list of rules the role should allow.

CommandProbeOptions

Options for Probe.fromCommand().

Initializer 

import { CommandProbeOptions } from 'cdk8s-plus-30'

const commandProbeOptions: CommandProbeOptions = { ... }
failureThresholdOptional 
public readonly failureThreshold: number;
  • Type: number
  • Default: 3

Minimum consecutive failures for the probe to be considered failed after having succeeded.

Defaults to 3. Minimum value is 1.

initialDelaySecondsOptional 
public readonly initialDelaySeconds: Duration;

Number of seconds after the container has started before liveness probes are initiated.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSecondsOptional 
public readonly periodSeconds: Duration;
  • Type: cdk8s.Duration
  • Default: Duration.seconds(10) Minimum value is 1.

How often (in seconds) to perform the probe.

Default to 10 seconds. Minimum value is 1.

successThresholdOptional 
public readonly successThreshold: number;
  • Type: number
  • Default: 1 Must be 1 for liveness and startup. Minimum value is 1.

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1.

Must be 1 for liveness and startup. Minimum value is 1.

timeoutSecondsOptional 
public readonly timeoutSeconds: Duration;

Number of seconds after which the probe times out.

Defaults to 1 second. Minimum value is 1.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

CommonSecretProps

Common properties for Secret.

Initializer 

import { CommonSecretProps } from 'cdk8s-plus-30'

const commonSecretProps: CommonSecretProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

immutableOptional 
public readonly immutable: boolean;
  • Type: boolean
  • Default: false

If set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified).

If not set to true, the field can be modified at any time.

ConfigMapProps

Properties for initialization of ConfigMap.

Initializer 

import { ConfigMapProps } from 'cdk8s-plus-30'

const configMapProps: ConfigMapProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

binaryDataOptional 
public readonly binaryData: {[ key: string ]: string};
  • Type: {[ key: string ]: string}

BinaryData contains the binary data.

Each key must consist of alphanumeric characters, ‘-‘, ‘_’ or ‘.’. BinaryData can contain byte sequences that are not in the UTF-8 range. The keys stored in BinaryData must not overlap with the ones in the Data field, this is enforced during validation process.

You can also add binary data using configMap.addBinaryData().

dataOptional 
public readonly data: {[ key: string ]: string};
  • Type: {[ key: string ]: string}

Data contains the configuration data.

Each key must consist of alphanumeric characters, ‘-‘, ‘_’ or ‘.’. Values with non-UTF-8 byte sequences must use the BinaryData field. The keys stored in Data must not overlap with the keys in the BinaryData field, this is enforced during validation process.

You can also add data using configMap.addData().

immutableOptional 
public readonly immutable: boolean;
  • Type: boolean
  • Default: false

If set to true, ensures that data stored in the ConfigMap cannot be updated (only object metadata can be modified).

If not set to true, the field can be modified at any time.

ConfigMapVolumeOptions

Options for the ConfigMap-based volume.

Initializer 

import { ConfigMapVolumeOptions } from 'cdk8s-plus-30'

const configMapVolumeOptions: ConfigMapVolumeOptions = { ... }
defaultModeOptional 
public readonly defaultMode: number;
  • Type: number
  • Default: 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

Mode bits to use on created files by default.

Must be a value between 0 and 0777. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

itemsOptional 
public readonly items: {[ key: string ]: PathMapping};

If unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value.

If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the ‘..’ path or start with ‘..’.

nameOptional 
public readonly name: string;
  • Type: string
  • Default: auto-generated

The volume name.

optionalOptional 
public readonly optional: boolean;
  • Type: boolean
  • Default: undocumented

Specify whether the ConfigMap or its keys must be defined.

ContainerLifecycle

Container lifecycle properties.

Initializer 

import { ContainerLifecycle } from 'cdk8s-plus-30'

const containerLifecycle: ContainerLifecycle = { ... }
postStartOptional 
public readonly postStart: Handler;

This hook is executed immediately after a container is created.

However, there is no guarantee that the hook will execute before the container ENTRYPOINT.

preStopOptional 
public readonly preStop: Handler;

This hook is called immediately before a container is terminated due to an API request or management event such as a liveness/startup probe failure, preemption, resource contention and others.

A call to the PreStop hook fails if the container is already in a terminated or completed state and the hook must complete before the TERM signal to stop the container can be sent. The Pod’s termination grace period countdown begins before the PreStop hook is executed, so regardless of the outcome of the handler, the container will eventually terminate within the Pod’s termination grace period. No parameters are passed to the handler.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-termination

ContainerOpts

Optional properties of a container.

Initializer 

import { ContainerOpts } from 'cdk8s-plus-30'

const containerOpts: ContainerOpts = { ... }
argsOptional 
public readonly args: string[];
  • Type: string[]
  • Default: []

Arguments to the entrypoint. The docker image’s CMD is used if command is not provided.

Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not.

Cannot be updated.

https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

commandOptional 
public readonly command: string[];
  • Type: string[]
  • Default: The docker image’s ENTRYPOINT.

Entrypoint array.

Not executed within a shell. The docker image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

envFromOptional 
public readonly envFrom: EnvFrom[];

List of sources to populate environment variables in the container.

When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by the envVariables property with a duplicate key will take precedence.

envVariablesOptional 
public readonly envVariables: {[ key: string ]: EnvValue};

Environment variables to set in the container.

imagePullPolicyOptional 
public readonly imagePullPolicy: ImagePullPolicy;

Image pull policy for this container.

lifecycleOptional 
public readonly lifecycle: ContainerLifecycle;

Describes actions that the management system should take in response to container lifecycle events.

livenessOptional 
public readonly liveness: Probe;

Periodic probe of container liveness.

Container will be restarted if the probe fails.

nameOptional 
public readonly name: string;
  • Type: string
  • Default: ‘main’

Name of the container specified as a DNS_LABEL.

Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated.

~~port~~Optional
  • Deprecated: - use portNumber.
public readonly port: number;
  • Type: number
portNumberOptional 
public readonly portNumber: number;
  • Type: number
  • Default: Only the ports mentiond in the ports property are exposed.

Number of port to expose on the pod’s IP address.

This must be a valid port number, 0 < x < 65536.

This is a convinience property if all you need a single TCP numbered port. In case more advanced configuartion is required, use the ports property.

This port is added to the list of ports mentioned in the ports property.

portsOptional 
public readonly ports: ContainerPort[];

List of ports to expose from this container.

readinessOptional 
public readonly readiness: Probe;

Determines when the container is ready to serve traffic.

resourcesOptional 
public readonly resources: ContainerResources;

Compute resources (CPU and memory requests and limits) required by the container.

https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

restartPolicyOptional 
public readonly restartPolicy: ContainerRestartPolicy;

Kubelet will start init containers with restartPolicy=Always in the order with other init containers, but instead of waiting for its completion, it will wait for the container startup completion Currently, only accepted value is Always.

https://kubernetes.io/docs/concepts/workloads/pods/sidecar-containers/

securityContextOptional 
public readonly securityContext: ContainerSecurityContextProps;

SecurityContext defines the security options the container should be run with.

If set, the fields override equivalent fields of the pod’s security context.

https://kubernetes.io/docs/tasks/configure-pod-container/security-context/

startupOptional 
public readonly startup: Probe;
  • Type: cdk8s-plus-30.Probe
  • Default: If a port is provided, then knocks on that port to determine when the container is ready for readiness and liveness probe checks. Otherwise, no startup probe is defined.

StartupProbe indicates that the Pod has successfully initialized.

If specified, no other probes are executed until this completes successfully

volumeMountsOptional 
public readonly volumeMounts: VolumeMount[];

Pod volumes to mount into the container’s filesystem.

Cannot be updated.

workingDirOptional 
public readonly workingDir: string;
  • Type: string
  • Default: The container runtime’s default.

Container’s working directory.

If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated.

ContainerPort

Represents a network port in a single container.

Initializer 

import { ContainerPort } from 'cdk8s-plus-30'

const containerPort: ContainerPort = { ... }
numberRequired 
public readonly number: number;
  • Type: number

Number of port to expose on the pod’s IP address.

This must be a valid port number, 0 < x < 65536.

hostIpOptional 
public readonly hostIp: string;
  • Type: string
  • Default: 127.0.0.1.

What host IP to bind the external port to.

hostPortOptional 
public readonly hostPort: number;
  • Type: number
  • Default: auto generated by kubernetes and might change on restarts.

Number of port to expose on the host.

If specified, this must be a valid port number, 0 < x < 65536. Most containers do not need this.

nameOptional 
public readonly name: string;
  • Type: string
  • Default: port is not named.

If specified, this must be an IANA_SVC_NAME and unique within the pod.

Each named port in a pod must have a unique name. Name for the port that can be referred to by services.

protocolOptional 
public readonly protocol: Protocol;

Protocol for port.

Must be UDP, TCP, or SCTP. Defaults to “TCP”.

ContainerProps

Properties for creating a container.

Initializer 

import { ContainerProps } from 'cdk8s-plus-30'

const containerProps: ContainerProps = { ... }
argsOptional 
public readonly args: string[];
  • Type: string[]
  • Default: []

Arguments to the entrypoint. The docker image’s CMD is used if command is not provided.

Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not.

Cannot be updated.

https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

commandOptional 
public readonly command: string[];
  • Type: string[]
  • Default: The docker image’s ENTRYPOINT.

Entrypoint array.

Not executed within a shell. The docker image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment. If a variable cannot be resolved, the reference in the input string will be unchanged. The $(VAR_NAME) syntax can be escaped with a double $$, ie: $$(VAR_NAME). Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell

envFromOptional 
public readonly envFrom: EnvFrom[];

List of sources to populate environment variables in the container.

When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by the envVariables property with a duplicate key will take precedence.

envVariablesOptional 
public readonly envVariables: {[ key: string ]: EnvValue};

Environment variables to set in the container.

imagePullPolicyOptional 
public readonly imagePullPolicy: ImagePullPolicy;

Image pull policy for this container.

lifecycleOptional 
public readonly lifecycle: ContainerLifecycle;

Describes actions that the management system should take in response to container lifecycle events.

livenessOptional 
public readonly liveness: Probe;

Periodic probe of container liveness.

Container will be restarted if the probe fails.

nameOptional 
public readonly name: string;
  • Type: string
  • Default: ‘main’

Name of the container specified as a DNS_LABEL.

Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated.

~~port~~Optional
  • Deprecated: - use portNumber.
public readonly port: number;
  • Type: number
portNumberOptional 
public readonly portNumber: number;
  • Type: number
  • Default: Only the ports mentiond in the ports property are exposed.

Number of port to expose on the pod’s IP address.

This must be a valid port number, 0 < x < 65536.

This is a convinience property if all you need a single TCP numbered port. In case more advanced configuartion is required, use the ports property.

This port is added to the list of ports mentioned in the ports property.

portsOptional 
public readonly ports: ContainerPort[];

List of ports to expose from this container.

readinessOptional 
public readonly readiness: Probe;

Determines when the container is ready to serve traffic.

resourcesOptional 
public readonly resources: ContainerResources;

Compute resources (CPU and memory requests and limits) required by the container.

https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

restartPolicyOptional 
public readonly restartPolicy: ContainerRestartPolicy;

Kubelet will start init containers with restartPolicy=Always in the order with other init containers, but instead of waiting for its completion, it will wait for the container startup completion Currently, only accepted value is Always.

https://kubernetes.io/docs/concepts/workloads/pods/sidecar-containers/

securityContextOptional 
public readonly securityContext: ContainerSecurityContextProps;

SecurityContext defines the security options the container should be run with.

If set, the fields override equivalent fields of the pod’s security context.

https://kubernetes.io/docs/tasks/configure-pod-container/security-context/

startupOptional 
public readonly startup: Probe;
  • Type: cdk8s-plus-30.Probe
  • Default: If a port is provided, then knocks on that port to determine when the container is ready for readiness and liveness probe checks. Otherwise, no startup probe is defined.

StartupProbe indicates that the Pod has successfully initialized.

If specified, no other probes are executed until this completes successfully

volumeMountsOptional 
public readonly volumeMounts: VolumeMount[];

Pod volumes to mount into the container’s filesystem.

Cannot be updated.

workingDirOptional 
public readonly workingDir: string;
  • Type: string
  • Default: The container runtime’s default.

Container’s working directory.

If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated.

imageRequired 
public readonly image: string;
  • Type: string

Docker image name.

ContainerResources

CPU and memory compute resources.

Initializer 

import { ContainerResources } from 'cdk8s-plus-30'

const containerResources: ContainerResources = { ... }
cpuOptional 
public readonly cpu: CpuResources;
ephemeralStorageOptional 
public readonly ephemeralStorage: EphemeralStorageResources;
memoryOptional 
public readonly memory: MemoryResources;

ContainerSecurityContextProps

Properties for ContainerSecurityContext.

Initializer 

import { ContainerSecurityContextProps } from 'cdk8s-plus-30'

const containerSecurityContextProps: ContainerSecurityContextProps = { ... }
allowPrivilegeEscalationOptional 
public readonly allowPrivilegeEscalation: boolean;
  • Type: boolean
  • Default: false

Whether a process can gain more privileges than its parent process.

capabilitiesOptional 
public readonly capabilities: ContainerSecutiryContextCapabilities;

POSIX capabilities for running containers.

ensureNonRootOptional 
public readonly ensureNonRoot: boolean;
  • Type: boolean
  • Default: true

Indicates that the container must run as a non-root user.

If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does.

groupOptional 
public readonly group: number;
  • Type: number
  • Default: 26000. An arbitrary number bigger than 9999 is selected here. This is so that the container is blocked to access host files even if somehow it manages to get access to host file system.

The GID to run the entrypoint of the container process.

privilegedOptional 
public readonly privileged: boolean;
  • Type: boolean
  • Default: false

Run container in privileged mode.

Processes in privileged containers are essentially equivalent to root on the host.

readOnlyRootFilesystemOptional 
public readonly readOnlyRootFilesystem: boolean;
  • Type: boolean
  • Default: true

Whether this container has a read-only root filesystem.

seccompProfileOptional 
public readonly seccompProfile: SeccompProfile;

Container’s seccomp profile settings.

Only one profile source may be set

userOptional 
public readonly user: number;
  • Type: number
  • Default: 25000. An arbitrary number bigger than 9999 is selected here. This is so that the container is blocked to access host files even if somehow it manages to get access to host file system.

The UID to run the entrypoint of the container process.

ContainerSecutiryContextCapabilities

Initializer 

import { ContainerSecutiryContextCapabilities } from 'cdk8s-plus-30'

const containerSecutiryContextCapabilities: ContainerSecutiryContextCapabilities = { ... }
addOptional 
public readonly add: Capability[];

Added capabilities.

dropOptional 
public readonly drop: Capability[];

Removed capabilities.

CpuResources

CPU request and limit.

Initializer 

import { CpuResources } from 'cdk8s-plus-30'

const cpuResources: CpuResources = { ... }
limitOptional 
public readonly limit: Cpu;
requestOptional 
public readonly request: Cpu;

CronJobProps

Properties for CronJob.

Initializer 

import { CronJobProps } from 'cdk8s-plus-30'

const cronJobProps: CronJobProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountServiceAccountTokenOptional 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether a service account token should be automatically mounted.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

containersOptional 
public readonly containers: ContainerProps[];

List of containers belonging to the pod.

Containers cannot currently be added or removed. There must be at least one container in a Pod.

You can add additionnal containers using podSpec.addContainer()

dnsOptional 
public readonly dns: PodDnsProps;

DNS settings for the pod.

https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/

dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;

A secret containing docker credentials for authenticating to a registry.

hostAliasesOptional 
public readonly hostAliases: HostAlias[];

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
  • Default: false

Host network for the pod.

initContainersOptional 
public readonly initContainers: ContainerProps[];

List of initialization containers belonging to the pod.

Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion.

Init containers cannot currently be added ,removed or updated.

https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

isolateOptional 
public readonly isolate: boolean;
  • Type: boolean
  • Default: false

Isolates the pod.

This will prevent any ingress or egress connections to / from this pod. You can however allow explicit connections post instantiation by using the .connections property.

restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;

Restart policy for all containers within the pod.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

securityContextOptional 
public readonly securityContext: PodSecurityContextProps;

SecurityContext holds pod-level security attributes and common container settings.

serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

Grace period until the pod is terminated.

volumesOptional 
public readonly volumes: Volume[];

List of volumes that can be mounted by containers belonging to the pod.

You can also add volumes later using podSpec.addVolume()

https://kubernetes.io/docs/concepts/storage/volumes

podMetadataOptional 
public readonly podMetadata: ApiObjectMetadata;

The pod metadata of this workload.

selectOptional 
public readonly select: boolean;
  • Type: boolean
  • Default: true

Automatically allocates a pod label selector for this workload and add it to the pod metadata.

This ensures this workload manages pods created by its pod template.

spreadOptional 
public readonly spread: boolean;
  • Type: boolean
  • Default: false

Automatically spread pods across hostname and zones.

https://kubernetes.io/docs/concepts/scheduling-eviction/topology-spread-constraints/#internal-default-constraints

activeDeadlineOptional 
public readonly activeDeadline: Duration;

Specifies the duration the job may be active before the system tries to terminate it.

backoffLimitOptional 
public readonly backoffLimit: number;
  • Type: number
  • Default: If not set, system defaults to 6.

Specifies the number of retries before marking this job failed.

ttlAfterFinishedOptional 
public readonly ttlAfterFinished: Duration;
  • Type: cdk8s.Duration
  • Default: If this field is unset, the Job won’t be automatically deleted.

Limits the lifetime of a Job that has finished execution (either Complete or Failed).

If this field is set, after the Job finishes, it is eligible to be automatically deleted. When the Job is being deleted, its lifecycle guarantees (e.g. finalizers) will be honored. If this field is set to zero, the Job becomes eligible to be deleted immediately after it finishes. This field is alpha-level and is only honored by servers that enable the TTLAfterFinished feature.

scheduleRequired 
public readonly schedule: Cron;

Specifies the time in which the job would run again.

This is defined as a cron expression in the CronJob resource.

concurrencyPolicyOptional 
public readonly concurrencyPolicy: ConcurrencyPolicy;

Specifies the concurrency policy for the job.

failedJobsRetainedOptional 
public readonly failedJobsRetained: number;
  • Type: number
  • Default: 1

Specifies the number of failed jobs history retained.

This would retain the Job and the associated Pod resource and can be useful for debugging.

startingDeadlineOptional 
public readonly startingDeadline: Duration;

Kubernetes attempts to start cron jobs at its schedule time, but this is not guaranteed.

This deadline specifies how much time can pass after a schedule point, for which kubernetes can still start the job. For example, if this is set to 100 seconds, kubernetes is allowed to start the job at a maximum 100 seconds after the scheduled time.

Note that the Kubernetes CronJobController checks for things every 10 seconds, for this reason, a deadline below 10 seconds is not allowed, as it may cause your job to never be scheduled.

In addition, kubernetes will stop scheduling jobs if more than 100 schedules were missed (for any reason). This property also controls what time interval should kubernetes consider when counting for missed schedules.

For example, suppose a CronJob is set to schedule a new Job every one minute beginning at 08:30:00, and its startingDeadline field is not set. If the CronJob controller happens to be down from 08:29:00 to 10:21:00, the job will not start as the number of missed jobs which missed their schedule is greater than 100. However, if startingDeadline is set to 200 seconds, kubernetes will only count 3 missed schedules, and thus start a new execution at 10:22:00.

successfulJobsRetainedOptional 
public readonly successfulJobsRetained: number;
  • Type: number
  • Default: 3

Specifies the number of successful jobs history retained.

This would retain the Job and the associated Pod resource and can be useful for debugging.

suspendOptional 
public readonly suspend: boolean;
  • Type: boolean
  • Default: false

Specifies if the cron job should be suspended.

Only applies to future executions, current ones are remained untouched.

timeZoneOptional 
public readonly timeZone: string;
  • Type: string
  • Default: Timezone of kube-controller-manager process.

Specifies the timezone for the job.

This helps aligining the schedule to follow the specified timezone.

{@link https://en.wikipedia.org/wiki/List_of_tz_database_time_zones} for list of valid timezone values.

CsiVolumeOptions

Options for the CSI driver based volume.

Initializer 

import { CsiVolumeOptions } from 'cdk8s-plus-30'

const csiVolumeOptions: CsiVolumeOptions = { ... }
attributesOptional 
public readonly attributes: {[ key: string ]: string};
  • Type: {[ key: string ]: string}
  • Default: undefined

Any driver-specific attributes to pass to the CSI volume builder.

fsTypeOptional 
public readonly fsType: string;
  • Type: string
  • Default: driver-dependent

The filesystem type to mount.

Ex. “ext4”, “xfs”, “ntfs”. If not provided, the empty value is passed to the associated CSI driver, which will determine the default filesystem to apply.

nameOptional 
public readonly name: string;
  • Type: string
  • Default: auto-generated

The volume name.

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Whether the mounted volume should be read-only or not.

DaemonSetProps

Properties for DaemonSet.

Initializer 

import { DaemonSetProps } from 'cdk8s-plus-30'

const daemonSetProps: DaemonSetProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountServiceAccountTokenOptional 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether a service account token should be automatically mounted.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

containersOptional 
public readonly containers: ContainerProps[];

List of containers belonging to the pod.

Containers cannot currently be added or removed. There must be at least one container in a Pod.

You can add additionnal containers using podSpec.addContainer()

dnsOptional 
public readonly dns: PodDnsProps;

DNS settings for the pod.

https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/

dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;

A secret containing docker credentials for authenticating to a registry.

hostAliasesOptional 
public readonly hostAliases: HostAlias[];

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
  • Default: false

Host network for the pod.

initContainersOptional 
public readonly initContainers: ContainerProps[];

List of initialization containers belonging to the pod.

Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion.

Init containers cannot currently be added ,removed or updated.

https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

isolateOptional 
public readonly isolate: boolean;
  • Type: boolean
  • Default: false

Isolates the pod.

This will prevent any ingress or egress connections to / from this pod. You can however allow explicit connections post instantiation by using the .connections property.

restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;

Restart policy for all containers within the pod.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

securityContextOptional 
public readonly securityContext: PodSecurityContextProps;

SecurityContext holds pod-level security attributes and common container settings.

serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

Grace period until the pod is terminated.

volumesOptional 
public readonly volumes: Volume[];

List of volumes that can be mounted by containers belonging to the pod.

You can also add volumes later using podSpec.addVolume()

https://kubernetes.io/docs/concepts/storage/volumes

podMetadataOptional 
public readonly podMetadata: ApiObjectMetadata;

The pod metadata of this workload.

selectOptional 
public readonly select: boolean;
  • Type: boolean
  • Default: true

Automatically allocates a pod label selector for this workload and add it to the pod metadata.

This ensures this workload manages pods created by its pod template.

spreadOptional 
public readonly spread: boolean;
  • Type: boolean
  • Default: false

Automatically spread pods across hostname and zones.

https://kubernetes.io/docs/concepts/scheduling-eviction/topology-spread-constraints/#internal-default-constraints

minReadySecondsOptional 
public readonly minReadySeconds: number;
  • Type: number
  • Default: 0

Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available.

DeploymentExposeViaServiceOptions

Options for Deployment.exposeViaService.

Initializer 

import { DeploymentExposeViaServiceOptions } from 'cdk8s-plus-30'

const deploymentExposeViaServiceOptions: DeploymentExposeViaServiceOptions = { ... }
nameOptional 
public readonly name: string;
  • Type: string
  • Default: auto generated.

The name of the service to expose.

If you’d like to expose the deployment multiple times, you must explicitly set a name starting from the second expose call.

portsOptional 
public readonly ports: ServicePort[];

The ports that the service should bind to.

serviceTypeOptional 
public readonly serviceType: ServiceType;

The type of the exposed service.

DeploymentProps

Properties for Deployment.

Initializer 

import { DeploymentProps } from 'cdk8s-plus-30'

const deploymentProps: DeploymentProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountServiceAccountTokenOptional 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether a service account token should be automatically mounted.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

containersOptional 
public readonly containers: ContainerProps[];

List of containers belonging to the pod.

Containers cannot currently be added or removed. There must be at least one container in a Pod.

You can add additionnal containers using podSpec.addContainer()

dnsOptional 
public readonly dns: PodDnsProps;

DNS settings for the pod.

https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/

dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;

A secret containing docker credentials for authenticating to a registry.

hostAliasesOptional 
public readonly hostAliases: HostAlias[];

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
  • Default: false

Host network for the pod.

initContainersOptional 
public readonly initContainers: ContainerProps[];

List of initialization containers belonging to the pod.

Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion.

Init containers cannot currently be added ,removed or updated.

https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

isolateOptional 
public readonly isolate: boolean;
  • Type: boolean
  • Default: false

Isolates the pod.

This will prevent any ingress or egress connections to / from this pod. You can however allow explicit connections post instantiation by using the .connections property.

restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;

Restart policy for all containers within the pod.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

securityContextOptional 
public readonly securityContext: PodSecurityContextProps;

SecurityContext holds pod-level security attributes and common container settings.

serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

Grace period until the pod is terminated.

volumesOptional 
public readonly volumes: Volume[];

List of volumes that can be mounted by containers belonging to the pod.

You can also add volumes later using podSpec.addVolume()

https://kubernetes.io/docs/concepts/storage/volumes

podMetadataOptional 
public readonly podMetadata: ApiObjectMetadata;

The pod metadata of this workload.

selectOptional 
public readonly select: boolean;
  • Type: boolean
  • Default: true

Automatically allocates a pod label selector for this workload and add it to the pod metadata.

This ensures this workload manages pods created by its pod template.

spreadOptional 
public readonly spread: boolean;
  • Type: boolean
  • Default: false

Automatically spread pods across hostname and zones.

https://kubernetes.io/docs/concepts/scheduling-eviction/topology-spread-constraints/#internal-default-constraints

minReadyOptional 
public readonly minReady: Duration;

Minimum duration for which a newly created pod should be ready without any of its container crashing, for it to be considered available.

Zero means the pod will be considered available as soon as it is ready.

https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#min-ready-seconds

progressDeadlineOptional 
public readonly progressDeadline: Duration;

The maximum duration for a deployment to make progress before it is considered to be failed.

The deployment controller will continue to process failed deployments and a condition with a ProgressDeadlineExceeded reason will be surfaced in the deployment status.

Note that progress will not be estimated during the time a deployment is paused.

https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#progress-deadline-seconds

replicasOptional 
public readonly replicas: number;
  • Type: number
  • Default: 2

Number of desired pods.

strategyOptional 
public readonly strategy: DeploymentStrategy;

Specifies the strategy used to replace old Pods by new ones.

DeploymentStrategyRollingUpdateOptions

Options for DeploymentStrategy.rollingUpdate.

Initializer 

import { DeploymentStrategyRollingUpdateOptions } from 'cdk8s-plus-30'

const deploymentStrategyRollingUpdateOptions: DeploymentStrategyRollingUpdateOptions = { ... }
maxSurgeOptional 
public readonly maxSurge: PercentOrAbsolute;

The maximum number of pods that can be scheduled above the desired number of pods.

Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding up. This can not be 0 if maxUnavailable is 0.

Example: when this is set to 30%, the new ReplicaSet can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new ReplicaSet can be scaled up further, ensuring that total number of pods running at any time during the update is at most 130% of desired pods.

maxUnavailableOptional 
public readonly maxUnavailable: PercentOrAbsolute;

The maximum number of pods that can be unavailable during the update.

Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if maxSurge is 0.

Example: when this is set to 30%, the old ReplicaSet can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old ReplicaSet can be scaled down further, followed by scaling up the new ReplicaSet, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods.

DnsOption

Custom DNS option.

Initializer 

import { DnsOption } from 'cdk8s-plus-30'

const dnsOption: DnsOption = { ... }
nameRequired 
public readonly name: string;
  • Type: string

Option name.

valueOptional 
public readonly value: string;
  • Type: string
  • Default: No value.

Option value.

DockerConfigSecretProps

Options for DockerConfigSecret.

Initializer 

import { DockerConfigSecretProps } from 'cdk8s-plus-30'

const dockerConfigSecretProps: DockerConfigSecretProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

immutableOptional 
public readonly immutable: boolean;
  • Type: boolean
  • Default: false

If set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified).

If not set to true, the field can be modified at any time.

dataRequired 
public readonly data: {[ key: string ]: any};
  • Type: {[ key: string ]: any}

JSON content to provide for the ~/.docker/config.json file. This will be stringified and inserted as stringData.

https://docs.docker.com/engine/reference/commandline/cli/#sample-configuration-file

EmptyDirVolumeOptions

Options for volumes populated with an empty directory.

Initializer 

import { EmptyDirVolumeOptions } from 'cdk8s-plus-30'

const emptyDirVolumeOptions: EmptyDirVolumeOptions = { ... }
mediumOptional 
public readonly medium: EmptyDirMedium;

By default, emptyDir volumes are stored on whatever medium is backing the node - that might be disk or SSD or network storage, depending on your environment.

However, you can set the emptyDir.medium field to EmptyDirMedium.MEMORY to tell Kubernetes to mount a tmpfs (RAM-backed filesystem) for you instead. While tmpfs is very fast, be aware that unlike disks, tmpfs is cleared on node reboot and any files you write will count against your Container’s memory limit.

sizeLimitOptional 
public readonly sizeLimit: Size;

Total amount of local storage required for this EmptyDir volume.

The size limit is also applicable for memory medium. The maximum usage on memory medium EmptyDir would be the minimum value between the SizeLimit specified here and the sum of memory limits of all containers in a pod.

EnvValueFromConfigMapOptions

Options to specify an envionment variable value from a ConfigMap key.

Initializer 

import { EnvValueFromConfigMapOptions } from 'cdk8s-plus-30'

const envValueFromConfigMapOptions: EnvValueFromConfigMapOptions = { ... }
optionalOptional 
public readonly optional: boolean;
  • Type: boolean
  • Default: false

Specify whether the ConfigMap or its key must be defined.

EnvValueFromFieldRefOptions

Options to specify an environment variable value from a field reference.

Initializer 

import { EnvValueFromFieldRefOptions } from 'cdk8s-plus-30'

const envValueFromFieldRefOptions: EnvValueFromFieldRefOptions = { ... }
apiVersionOptional 
public readonly apiVersion: string;
  • Type: string

Version of the schema the FieldPath is written in terms of.

keyOptional 
public readonly key: string;
  • Type: string

The key to select the pod label or annotation.

EnvValueFromProcessOptions

Options to specify an environment variable value from the process environment.

Initializer 

import { EnvValueFromProcessOptions } from 'cdk8s-plus-30'

const envValueFromProcessOptions: EnvValueFromProcessOptions = { ... }
requiredOptional 
public readonly required: boolean;
  • Type: boolean
  • Default: false

Specify whether the key must exist in the environment.

If this is set to true, and the key does not exist, an error will thrown.

EnvValueFromResourceOptions

Options to specify an environment variable value from a resource.

Initializer 

import { EnvValueFromResourceOptions } from 'cdk8s-plus-30'

const envValueFromResourceOptions: EnvValueFromResourceOptions = { ... }
containerOptional 
public readonly container: Container;

The container to select the value from.

divisorOptional 
public readonly divisor: string;
  • Type: string

The output format of the exposed resource.

EnvValueFromSecretOptions

Options to specify an environment variable value from a Secret.

Initializer 

import { EnvValueFromSecretOptions } from 'cdk8s-plus-30'

const envValueFromSecretOptions: EnvValueFromSecretOptions = { ... }
optionalOptional 
public readonly optional: boolean;
  • Type: boolean
  • Default: false

Specify whether the Secret or its key must be defined.

EphemeralStorageResources

Emphemeral storage request and limit.

Initializer 

import { EphemeralStorageResources } from 'cdk8s-plus-30'

const ephemeralStorageResources: EphemeralStorageResources = { ... }
limitOptional 
public readonly limit: Size;
requestOptional 
public readonly request: Size;

ExposeDeploymentViaIngressOptions

Options for exposing a deployment via an ingress.

Initializer 

import { ExposeDeploymentViaIngressOptions } from 'cdk8s-plus-30'

const exposeDeploymentViaIngressOptions: ExposeDeploymentViaIngressOptions = { ... }
nameOptional 
public readonly name: string;
  • Type: string
  • Default: auto generated.

The name of the service to expose.

If you’d like to expose the deployment multiple times, you must explicitly set a name starting from the second expose call.

portsOptional 
public readonly ports: ServicePort[];

The ports that the service should bind to.

serviceTypeOptional 
public readonly serviceType: ServiceType;

The type of the exposed service.

ingressOptional 
public readonly ingress: Ingress;

The ingress to add rules to.

pathTypeOptional 
public readonly pathType: HttpIngressPathType;

The type of the path.

ExposeServiceViaIngressOptions

Options for exposing a service using an ingress.

Initializer 

import { ExposeServiceViaIngressOptions } from 'cdk8s-plus-30'

const exposeServiceViaIngressOptions: ExposeServiceViaIngressOptions = { ... }
ingressOptional 
public readonly ingress: Ingress;

The ingress to add rules to.

pathTypeOptional 
public readonly pathType: HttpIngressPathType;

The type of the path.

FromServiceAccountNameOptions

Initializer 

import { FromServiceAccountNameOptions } from 'cdk8s-plus-30'

const fromServiceAccountNameOptions: FromServiceAccountNameOptions = { ... }
namespaceNameOptional 
public readonly namespaceName: string;
  • Type: string
  • Default: “default”

The name of the namespace the service account belongs to.

GCEPersistentDiskPersistentVolumeProps

Properties for GCEPersistentDiskPersistentVolume.

Initializer 

import { GCEPersistentDiskPersistentVolumeProps } from 'cdk8s-plus-30'

const gCEPersistentDiskPersistentVolumeProps: GCEPersistentDiskPersistentVolumeProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

accessModesOptional 
public readonly accessModes: PersistentVolumeAccessMode[];

Contains all ways the volume can be mounted.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes

claimOptional 
public readonly claim: IPersistentVolumeClaim;

Part of a bi-directional binding between PersistentVolume and PersistentVolumeClaim.

Expected to be non-nil when bound.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#binding

mountOptionsOptional 
public readonly mountOptions: string[];
  • Type: string[]
  • Default: No options.

A list of mount options, e.g. [“ro”, “soft”]. Not validated - mount will simply fail if one is invalid.

https://kubernetes.io/docs/concepts/storage/persistent-volumes/#mount-options

reclaimPolicyOptional 
public readonly reclaimPolicy: PersistentVolumeReclaimPolicy;

When a user is done with their volume, they can delete the PVC objects from the API that allows reclamation of the resource.

The reclaim policy tells the cluster what to do with the volume after it has been released of its claim.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#reclaiming

storageOptional 
public readonly storage: Size;

What is the storage capacity of this volume.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources

storageClassNameOptional 
public readonly storageClassName: string;
  • Type: string
  • Default: Volume does not belong to any storage class.

Name of StorageClass to which this persistent volume belongs.

volumeModeOptional 
public readonly volumeMode: PersistentVolumeMode;

Defines what type of volume is required by the claim.

pdNameRequired 
public readonly pdName: string;
  • Type: string

Unique name of the PD resource in GCE.

Used to identify the disk in GCE.

https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk

fsTypeOptional 
public readonly fsType: string;
  • Type: string
  • Default: ‘ext4’

Filesystem type of the volume that you want to mount.

Tip: Ensure that the filesystem type is supported by the host operating system.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

partitionOptional 
public readonly partition: number;
  • Type: number
  • Default: No partition.

The partition in the volume that you want to mount.

If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as “1”. Similarly, the volume partition for /dev/sda is “0” (or you can leave the property empty).

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Specify “true” to force and set the ReadOnly property in VolumeMounts to “true”.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

GCEPersistentDiskVolumeOptions

Options of Volume.fromGcePersistentDisk.

Initializer 

import { GCEPersistentDiskVolumeOptions } from 'cdk8s-plus-30'

const gCEPersistentDiskVolumeOptions: GCEPersistentDiskVolumeOptions = { ... }
fsTypeOptional 
public readonly fsType: string;
  • Type: string
  • Default: ‘ext4’

Filesystem type of the volume that you want to mount.

Tip: Ensure that the filesystem type is supported by the host operating system.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

nameOptional 
public readonly name: string;
  • Type: string
  • Default: auto-generated

The volume name.

partitionOptional 
public readonly partition: number;
  • Type: number
  • Default: No partition.

The partition in the volume that you want to mount.

If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as “1”. Similarly, the volume partition for /dev/sda is “0” (or you can leave the property empty).

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Specify “true” to force and set the ReadOnly property in VolumeMounts to “true”.

https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

HandlerFromHttpGetOptions

Options for Handler.fromHttpGet.

Initializer 

import { HandlerFromHttpGetOptions } from 'cdk8s-plus-30'

const handlerFromHttpGetOptions: HandlerFromHttpGetOptions = { ... }
portOptional 
public readonly port: number;
  • Type: number
  • Default: defaults to container.port.

The TCP port to use when sending the GET request.

HandlerFromTcpSocketOptions

Options for Handler.fromTcpSocket.

Initializer 

import { HandlerFromTcpSocketOptions } from 'cdk8s-plus-30'

const handlerFromTcpSocketOptions: HandlerFromTcpSocketOptions = { ... }
hostOptional 
public readonly host: string;
  • Type: string
  • Default: defaults to the pod IP

The host name to connect to on the container.

portOptional 
public readonly port: number;
  • Type: number
  • Default: defaults to container.port.

The TCP port to connect to on the container.

HorizontalPodAutoscalerProps

Properties for HorizontalPodAutoscaler.

Initializer 

import { HorizontalPodAutoscalerProps } from 'cdk8s-plus-30'

const horizontalPodAutoscalerProps: HorizontalPodAutoscalerProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

maxReplicasRequired 
public readonly maxReplicas: number;
  • Type: number

The maximum number of replicas that can be scaled up to.

targetRequired 
public readonly target: IScalable;

The workload to scale up or down.

Scalable workload types: * Deployment * StatefulSet

metricsOptional 
public readonly metrics: Metric[];
  • Type: cdk8s-plus-30.Metric[]
  • Default: If metrics are not provided, then the target resource constraints (e.g. cpu limit) will be used as scaling metrics.

The metric conditions that trigger a scale up or scale down.

minReplicasOptional 
public readonly minReplicas: number;
  • Type: number
  • Default: 1

The minimum number of replicas that can be scaled down to.

Can be set to 0 if the alpha feature gate HPAScaleToZero is enabled and at least one Object or External metric is configured.

scaleDownOptional 
public readonly scaleDown: ScalingRules;

The scaling behavior when scaling down.

scaleUpOptional 
public readonly scaleUp: ScalingRules;
  • Type: cdk8s-plus-30.ScalingRules
  • Default: Is the higher of:
  • Increase no more than 4 pods per 60 seconds
  • Double the number of pods per 60 seconds

The scaling behavior when scaling up.

HostAlias

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s /etc/hosts file.

Initializer 

import { HostAlias } from 'cdk8s-plus-30'

const hostAlias: HostAlias = { ... }
hostnamesRequired 
public readonly hostnames: string[];
  • Type: string[]

Hostnames for the chosen IP address.

ipRequired 
public readonly ip: string;
  • Type: string

IP address of the host file entry.

HostPathVolumeOptions

Options for a HostPathVolume-based volume.

Initializer 

import { HostPathVolumeOptions } from 'cdk8s-plus-30'

const hostPathVolumeOptions: HostPathVolumeOptions = { ... }
pathRequired 
public readonly path: string;
  • Type: string

The path of the directory on the host.

typeOptional 
public readonly type: HostPathVolumeType;

The expected type of the path found on the host.

HttpGetProbeOptions

Options for Probe.fromHttpGet().

Initializer 

import { HttpGetProbeOptions } from 'cdk8s-plus-30'

const httpGetProbeOptions: HttpGetProbeOptions = { ... }
failureThresholdOptional 
public readonly failureThreshold: number;
  • Type: number
  • Default: 3

Minimum consecutive failures for the probe to be considered failed after having succeeded.

Defaults to 3. Minimum value is 1.

initialDelaySecondsOptional 
public readonly initialDelaySeconds: Duration;

Number of seconds after the container has started before liveness probes are initiated.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSecondsOptional 
public readonly periodSeconds: Duration;
  • Type: cdk8s.Duration
  • Default: Duration.seconds(10) Minimum value is 1.

How often (in seconds) to perform the probe.

Default to 10 seconds. Minimum value is 1.

successThresholdOptional 
public readonly successThreshold: number;
  • Type: number
  • Default: 1 Must be 1 for liveness and startup. Minimum value is 1.

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1.

Must be 1 for liveness and startup. Minimum value is 1.

timeoutSecondsOptional 
public readonly timeoutSeconds: Duration;

Number of seconds after which the probe times out.

Defaults to 1 second. Minimum value is 1.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

hostOptional 
public readonly host: string;
  • Type: string
  • Default: defaults to the pod IP

The host name to connect to on the container.

portOptional 
public readonly port: number;
  • Type: number
  • Default: defaults to container.port.

The TCP port to use when sending the GET request.

schemeOptional 
public readonly scheme: ConnectionScheme;

Scheme to use for connecting to the host (HTTP or HTTPS).

IngressProps

Properties for Ingress.

Initializer 

import { IngressProps } from 'cdk8s-plus-30'

const ingressProps: IngressProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

classNameOptional 
public readonly className: string;
  • Type: string

Class Name for this ingress.

This field is a reference to an IngressClass resource that contains additional Ingress configuration, including the name of the Ingress controller.

defaultBackendOptional 
public readonly defaultBackend: IngressBackend;

The default backend services requests that do not match any rule.

Using this option or the addDefaultBackend() method is equivalent to adding a rule with both path and host undefined.

rulesOptional 
public readonly rules: IngressRule[];

Routing rules for this ingress.

Each rule must define an IngressBackend that will receive the requests that match this rule. If both host and path are not specifiec, this backend will be used as the default backend of the ingress.

You can also add rules later using addRule(), addHostRule(), addDefaultBackend() and addHostDefaultBackend().

tlsOptional 
public readonly tls: IngressTls[];

TLS settings for this ingress.

Using this option tells the ingress controller to expose a TLS endpoint. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.

IngressRule

Represents the rules mapping the paths under a specified host to the related backend services.

Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching path.

Initializer 

import { IngressRule } from 'cdk8s-plus-30'

const ingressRule: IngressRule = { ... }
backendRequired 
public readonly backend: IngressBackend;

Backend defines the referenced service endpoint to which the traffic will be forwarded to.

hostOptional 
public readonly host: string;
  • Type: string
  • Default: If the host is unspecified, the Ingress routes all traffic based on the specified IngressRuleValue.

Host is the fully qualified domain name of a network host, as defined by RFC 3986.

Note the following deviations from the “host” part of the URI as defined in the RFC: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the IP in the Spec of the parent Ingress. 2. The : delimiter is not respected because ports are not allowed. Currently the port of an Ingress is implicitly :80 for http and :443 for https. Both these may change in the future. Incoming requests are matched against the host before the IngressRuleValue.

pathOptional 
public readonly path: string;
  • Type: string
  • Default: If unspecified, the path defaults to a catch all sending traffic to the backend.

Path is an extended POSIX regex as defined by IEEE Std 1003.1, (i.e this follows the egrep/unix syntax, not the perl syntax) matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional “path” part of a URL as defined by RFC 3986. Paths must begin with a ‘/’.

pathTypeOptional 
public readonly pathType: HttpIngressPathType;

Specify how the path is matched against request paths.

By default, path types will be matched by prefix.

https://kubernetes.io/docs/concepts/services-networking/ingress/#path-types

IngressTls

Represents the TLS configuration mapping that is passed to the ingress controller for SSL termination.

Initializer 

import { IngressTls } from 'cdk8s-plus-30'

const ingressTls: IngressTls = { ... }
hostsOptional 
public readonly hosts: string[];
  • Type: string[]
  • Default: If unspecified, it defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress.

Hosts are a list of hosts included in the TLS certificate.

The values in this list must match the name/s used in the TLS Secret.

secretOptional 
public readonly secret: ISecret;

Secret is the secret that contains the certificate and key used to terminate SSL traffic on 443.

If the SNI host in a listener conflicts with the “Host” header field used by an IngressRule, the SNI host is used for termination and value of the Host header is used for routing.

JobProps

Properties for Job.

Initializer 

import { JobProps } from 'cdk8s-plus-30'

const jobProps: JobProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountServiceAccountTokenOptional 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether a service account token should be automatically mounted.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

containersOptional 
public readonly containers: ContainerProps[];

List of containers belonging to the pod.

Containers cannot currently be added or removed. There must be at least one container in a Pod.

You can add additionnal containers using podSpec.addContainer()

dnsOptional 
public readonly dns: PodDnsProps;

DNS settings for the pod.

https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/

dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;

A secret containing docker credentials for authenticating to a registry.

hostAliasesOptional 
public readonly hostAliases: HostAlias[];

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
  • Default: false

Host network for the pod.

initContainersOptional 
public readonly initContainers: ContainerProps[];

List of initialization containers belonging to the pod.

Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion.

Init containers cannot currently be added ,removed or updated.

https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

isolateOptional 
public readonly isolate: boolean;
  • Type: boolean
  • Default: false

Isolates the pod.

This will prevent any ingress or egress connections to / from this pod. You can however allow explicit connections post instantiation by using the .connections property.

restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;

Restart policy for all containers within the pod.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

securityContextOptional 
public readonly securityContext: PodSecurityContextProps;

SecurityContext holds pod-level security attributes and common container settings.

serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

Grace period until the pod is terminated.

volumesOptional 
public readonly volumes: Volume[];

List of volumes that can be mounted by containers belonging to the pod.

You can also add volumes later using podSpec.addVolume()

https://kubernetes.io/docs/concepts/storage/volumes

podMetadataOptional 
public readonly podMetadata: ApiObjectMetadata;

The pod metadata of this workload.

selectOptional 
public readonly select: boolean;
  • Type: boolean
  • Default: true

Automatically allocates a pod label selector for this workload and add it to the pod metadata.

This ensures this workload manages pods created by its pod template.

spreadOptional 
public readonly spread: boolean;
  • Type: boolean
  • Default: false

Automatically spread pods across hostname and zones.

https://kubernetes.io/docs/concepts/scheduling-eviction/topology-spread-constraints/#internal-default-constraints

activeDeadlineOptional 
public readonly activeDeadline: Duration;

Specifies the duration the job may be active before the system tries to terminate it.

backoffLimitOptional 
public readonly backoffLimit: number;
  • Type: number
  • Default: If not set, system defaults to 6.

Specifies the number of retries before marking this job failed.

ttlAfterFinishedOptional 
public readonly ttlAfterFinished: Duration;
  • Type: cdk8s.Duration
  • Default: If this field is unset, the Job won’t be automatically deleted.

Limits the lifetime of a Job that has finished execution (either Complete or Failed).

If this field is set, after the Job finishes, it is eligible to be automatically deleted. When the Job is being deleted, its lifecycle guarantees (e.g. finalizers) will be honored. If this field is set to zero, the Job becomes eligible to be deleted immediately after it finishes. This field is alpha-level and is only honored by servers that enable the TTLAfterFinished feature.

LabelSelectorOptions

Options for LabelSelector.of.

Initializer 

import { LabelSelectorOptions } from 'cdk8s-plus-30'

const labelSelectorOptions: LabelSelectorOptions = { ... }
expressionsOptional 
public readonly expressions: LabelExpression[];

Expression based label matchers.

labelsOptional 
public readonly labels: {[ key: string ]: string};
  • Type: {[ key: string ]: string}

Strict label matchers.

LabelSelectorRequirement

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

Initializer 

import { LabelSelectorRequirement } from 'cdk8s-plus-30'

const labelSelectorRequirement: LabelSelectorRequirement = { ... }
keyRequired 
public readonly key: string;
  • Type: string

The label key that the selector applies to.

operatorRequired 
public readonly operator: string;
  • Type: string

Represents a key’s relationship to a set of values.

valuesOptional 
public readonly values: string[];
  • Type: string[]

An array of string values.

If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

MemoryResources

Memory request and limit.

Initializer 

import { MemoryResources } from 'cdk8s-plus-30'

const memoryResources: MemoryResources = { ... }
limitOptional 
public readonly limit: Size;
requestOptional 
public readonly request: Size;

MetricContainerResourceOptions

Options for Metric.containerResource().

Initializer 

import { MetricContainerResourceOptions } from 'cdk8s-plus-30'

const metricContainerResourceOptions: MetricContainerResourceOptions = { ... }
containerRequired 
public readonly container: Container;

Container where the metric can be found.

targetRequired 
public readonly target: MetricTarget;

Target metric value that will trigger scaling.

MetricObjectOptions

Options for Metric.object().

Initializer 

import { MetricObjectOptions } from 'cdk8s-plus-30'

const metricObjectOptions: MetricObjectOptions = { ... }
nameRequired 
public readonly name: string;
  • Type: string

The name of the metric to scale on.

targetRequired 
public readonly target: MetricTarget;

The target metric value that will trigger scaling.

labelSelectorOptional 
public readonly labelSelector: LabelSelector;

A selector to find a metric by label.

When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping.

objectRequired 
public readonly object: IResource;

Resource where the metric can be found.

MetricOptions

Base options for a Metric.

Initializer 

import { MetricOptions } from 'cdk8s-plus-30'

const metricOptions: MetricOptions = { ... }
nameRequired 
public readonly name: string;
  • Type: string

The name of the metric to scale on.

targetRequired 
public readonly target: MetricTarget;

The target metric value that will trigger scaling.

labelSelectorOptional 
public readonly labelSelector: LabelSelector;

A selector to find a metric by label.

When set, it is passed as an additional parameter to the metrics server for more specific metrics scoping.

MountOptions

Options for mounts.

Initializer 

import { MountOptions } from 'cdk8s-plus-30'

const mountOptions: MountOptions = { ... }
propagationOptional 
public readonly propagation: MountPropagation;

Determines how mounts are propagated from the host to container and the other way around.

When not set, MountPropagationNone is used.

Mount propagation allows for sharing volumes mounted by a Container to other Containers in the same Pod, or even to other Pods on the same node.

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Mounted read-only if true, read-write otherwise (false or unspecified).

Defaults to false.

subPathOptional 
public readonly subPath: string;
  • Type: string
  • Default: “” the volume’s root

Path within the volume from which the container’s volume should be mounted.).

subPathExprOptional 
public readonly subPathExpr: string;
  • Type: string
  • Default: “” volume’s root.

Expanded path within the volume from which the container’s volume should be mounted.

Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container’s environment. Defaults to “” (volume’s root).

subPathExpr and subPath are mutually exclusive.

NamespaceProps

Properties for Namespace.

Initializer 

import { NamespaceProps } from 'cdk8s-plus-30'

const namespaceProps: NamespaceProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

NamespaceSelectorConfig

Configuration for selecting namespaces.

Initializer 

import { NamespaceSelectorConfig } from 'cdk8s-plus-30'

const namespaceSelectorConfig: NamespaceSelectorConfig = { ... }
labelSelectorOptional 
public readonly labelSelector: LabelSelector;

A selector to select namespaces by labels.

namesOptional 
public readonly names: string[];
  • Type: string[]

A list of names to select namespaces by names.

NamespacesSelectOptions

Options for Namespaces.select.

Initializer 

import { NamespacesSelectOptions } from 'cdk8s-plus-30'

const namespacesSelectOptions: NamespacesSelectOptions = { ... }
expressionsOptional 
public readonly expressions: LabelExpression[];

Namespaces must satisfy these selectors.

The selectors query labels, just like the labels property, but they provide a more advanced matching mechanism.

labelsOptional 
public readonly labels: {[ key: string ]: string};
  • Type: {[ key: string ]: string}
  • Default: no strict labels requirements.

Labels the namespaces must have.

This is equivalent to using an ‘Is’ selector.

namesOptional 
public readonly names: string[];
  • Type: string[]
  • Default: no name requirements.

Namespaces names must be one of these.

NetworkPolicyAddEgressRuleOptions

Options for NetworkPolicy.addEgressRule.

Initializer 

import { NetworkPolicyAddEgressRuleOptions } from 'cdk8s-plus-30'

const networkPolicyAddEgressRuleOptions: NetworkPolicyAddEgressRuleOptions = { ... }
portsOptional 
public readonly ports: NetworkPolicyPort[];

Ports the rule should allow outgoing traffic to.

NetworkPolicyPeerConfig

Configuration for network peers.

A peer can either by an ip block, or a selection of pods, not both.

Initializer 

import { NetworkPolicyPeerConfig } from 'cdk8s-plus-30'

const networkPolicyPeerConfig: NetworkPolicyPeerConfig = { ... }
ipBlockOptional 
public readonly ipBlock: NetworkPolicyIpBlock;

The ip block this peer represents.

podSelectorOptional 
public readonly podSelector: PodSelectorConfig;

The pod selector this peer represents.

NetworkPolicyPortProps

Properties for NetworkPolicyPort.

Initializer 

import { NetworkPolicyPortProps } from 'cdk8s-plus-30'

const networkPolicyPortProps: NetworkPolicyPortProps = { ... }
endPortOptional 
public readonly endPort: number;
  • Type: number
  • Default: not a port range.

End port (relative to port).

Only applies if port is defined. Use this to specify a port range, rather that a specific one.

portOptional 
public readonly port: number;
  • Type: number
  • Default: all ports are allowed.

Specific port number.

protocolOptional 
public readonly protocol: NetworkProtocol;

Protocol.

NetworkPolicyProps

Properties for NetworkPolicy.

Initializer 

import { NetworkPolicyProps } from 'cdk8s-plus-30'

const networkPolicyProps: NetworkPolicyProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

egressOptional 
public readonly egress: NetworkPolicyTraffic;

Egress traffic configuration.

ingressOptional 
public readonly ingress: NetworkPolicyTraffic;

Ingress traffic configuration.

selectorOptional 
public readonly selector: IPodSelector;

Which pods does this policy object applies to.

This can either be a single pod / workload, or a grouping of pods selected via the Pods.select function. Rules is applied to any pods selected by this property. Multiple network policies can select the same set of pods. In this case, the rules for each are combined additively.

Note that

NetworkPolicyRule

Describes a rule allowing traffic from / to pods matched by a network policy selector.

Initializer 

import { NetworkPolicyRule } from 'cdk8s-plus-30'

const networkPolicyRule: NetworkPolicyRule = { ... }
peerRequired 
public readonly peer: INetworkPolicyPeer;

Peer this rule interacts with.

portsOptional 
public readonly ports: NetworkPolicyPort[];

The ports of the rule.

NetworkPolicyTraffic

Describes how the network policy should configure egress / ingress traffic.

Initializer 

import { NetworkPolicyTraffic } from 'cdk8s-plus-30'

const networkPolicyTraffic: NetworkPolicyTraffic = { ... }
defaultOptional 
public readonly default: NetworkPolicyTrafficDefault;

Specifies the default behavior of the policy when no rules are defined.

rulesOptional 
public readonly rules: NetworkPolicyRule[];

List of rules to be applied to the selected pods.

If empty, the behavior of the policy is dictated by the default property.

NfsVolumeOptions

Options for the NFS based volume.

Initializer 

import { NfsVolumeOptions } from 'cdk8s-plus-30'

const nfsVolumeOptions: NfsVolumeOptions = { ... }
pathRequired 
public readonly path: string;
  • Type: string

Path that is exported by the NFS server.

serverRequired 
public readonly server: string;
  • Type: string

Server is the hostname or IP address of the NFS server.

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

If set to true, will force the NFS export to be mounted with read-only permissions.

NodeTaintQueryOptions

Options for NodeTaintQuery.

Initializer 

import { NodeTaintQueryOptions } from 'cdk8s-plus-30'

const nodeTaintQueryOptions: NodeTaintQueryOptions = { ... }
effectOptional 
public readonly effect: TaintEffect;

The taint effect to match.

evictAfterOptional 
public readonly evictAfter: Duration;

How much time should a pod that tolerates the NO_EXECUTE effect be bound to the node.

Only applies for the NO_EXECUTE effect.

PathMapping

Maps a string key to a path within a volume.

Initializer 

import { PathMapping } from 'cdk8s-plus-30'

const pathMapping: PathMapping = { ... }
pathRequired 
public readonly path: string;
  • Type: string

The relative path of the file to map the key to.

May not be an absolute path. May not contain the path element ‘..’. May not start with the string ‘..’.

modeOptional 
public readonly mode: number;
  • Type: number

Optional: mode bits to use on this file, must be a value between 0 and 0777.

If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

PersistentVolumeClaimProps

Properties for PersistentVolumeClaim.

Initializer 

import { PersistentVolumeClaimProps } from 'cdk8s-plus-30'

const persistentVolumeClaimProps: PersistentVolumeClaimProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

accessModesOptional 
public readonly accessModes: PersistentVolumeAccessMode[];

Contains the access modes the volume should support.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1

storageOptional 
public readonly storage: Size;
  • Type: cdk8s.Size
  • Default: No storage requirement.

Minimum storage size the volume should have.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources

storageClassNameOptional 
public readonly storageClassName: string;
  • Type: string
  • Default: Not set.

Name of the StorageClass required by the claim. When this property is not set, the behavior is as follows:.

If the admission plugin is turned on, the storage class marked as default will be used. - If the admission plugin is turned off, the pvc can only be bound to volumes without a storage class.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1

volumeOptional 
public readonly volume: IPersistentVolume;

The PersistentVolume backing this claim.

The control plane still checks that storage class, access modes, and requested storage size on the volume are valid.

Note that in order to guarantee a proper binding, the volume should also define a claimRef referring to this claim. Otherwise, the volume may be claimed be other pvc’s before it gets a chance to bind to this one.

If the volume is managed (i.e not imported), you can use pv.claim() to easily create a bi-directional bounded claim.

https://kubernetes.io/docs/concepts/storage/persistent-volumes/#binding.

volumeModeOptional 
public readonly volumeMode: PersistentVolumeMode;

Defines what type of volume is required by the claim.

PersistentVolumeClaimVolumeOptions

Options for a PersistentVolumeClaim-based volume.

Initializer 

import { PersistentVolumeClaimVolumeOptions } from 'cdk8s-plus-30'

const persistentVolumeClaimVolumeOptions: PersistentVolumeClaimVolumeOptions = { ... }
nameOptional 
public readonly name: string;
  • Type: string
  • Default: Derived from the PVC name.

The volume name.

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Will force the ReadOnly setting in VolumeMounts.

PersistentVolumeProps

Properties for PersistentVolume.

Initializer 

import { PersistentVolumeProps } from 'cdk8s-plus-30'

const persistentVolumeProps: PersistentVolumeProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

accessModesOptional 
public readonly accessModes: PersistentVolumeAccessMode[];

Contains all ways the volume can be mounted.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes

claimOptional 
public readonly claim: IPersistentVolumeClaim;

Part of a bi-directional binding between PersistentVolume and PersistentVolumeClaim.

Expected to be non-nil when bound.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#binding

mountOptionsOptional 
public readonly mountOptions: string[];
  • Type: string[]
  • Default: No options.

A list of mount options, e.g. [“ro”, “soft”]. Not validated - mount will simply fail if one is invalid.

https://kubernetes.io/docs/concepts/storage/persistent-volumes/#mount-options

reclaimPolicyOptional 
public readonly reclaimPolicy: PersistentVolumeReclaimPolicy;

When a user is done with their volume, they can delete the PVC objects from the API that allows reclamation of the resource.

The reclaim policy tells the cluster what to do with the volume after it has been released of its claim.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#reclaiming

storageOptional 
public readonly storage: Size;

What is the storage capacity of this volume.

https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources

storageClassNameOptional 
public readonly storageClassName: string;
  • Type: string
  • Default: Volume does not belong to any storage class.

Name of StorageClass to which this persistent volume belongs.

volumeModeOptional 
public readonly volumeMode: PersistentVolumeMode;

Defines what type of volume is required by the claim.

PodConnectionsAllowFromOptions

Options for PodConnections.allowFrom.

Initializer 

import { PodConnectionsAllowFromOptions } from 'cdk8s-plus-30'

const podConnectionsAllowFromOptions: PodConnectionsAllowFromOptions = { ... }
isolationOptional 
public readonly isolation: PodConnectionsIsolation;

Which isolation should be applied to establish the connection.

portsOptional 
public readonly ports: NetworkPolicyPort[];

Ports to allow incoming traffic to.

PodConnectionsAllowToOptions

Options for PodConnections.allowTo.

Initializer 

import { PodConnectionsAllowToOptions } from 'cdk8s-plus-30'

const podConnectionsAllowToOptions: PodConnectionsAllowToOptions = { ... }
isolationOptional 
public readonly isolation: PodConnectionsIsolation;

Which isolation should be applied to establish the connection.

portsOptional 
public readonly ports: NetworkPolicyPort[];

Ports to allow outgoing traffic to.

PodDnsProps

Properties for PodDns.

Initializer 

import { PodDnsProps } from 'cdk8s-plus-30'

const podDnsProps: PodDnsProps = { ... }
hostnameOptional 
public readonly hostname: string;
  • Type: string
  • Default: Set to a system-defined value.

Specifies the hostname of the Pod.

hostnameAsFQDNOptional 
public readonly hostnameAsFQDN: boolean;
  • Type: boolean
  • Default: false

If true the pod’s hostname will be configured as the pod’s FQDN, rather than the leaf name (the default).

In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters to FQDN. If a pod does not have FQDN, this has no effect.

nameserversOptional 
public readonly nameservers: string[];
  • Type: string[]

A list of IP addresses that will be used as DNS servers for the Pod.

There can be at most 3 IP addresses specified. When the policy is set to “NONE”, the list must contain at least one IP address, otherwise this property is optional. The servers listed will be combined to the base nameservers generated from the specified DNS policy with duplicate addresses removed.

optionsOptional 
public readonly options: DnsOption[];

List of objects where each object may have a name property (required) and a value property (optional).

The contents in this property will be merged to the options generated from the specified DNS policy. Duplicate entries are removed.

policyOptional 
public readonly policy: DnsPolicy;

Set DNS policy for the pod.

If policy is set to None, other configuration must be supplied.

searchesOptional 
public readonly searches: string[];
  • Type: string[]

A list of DNS search domains for hostname lookup in the Pod.

When specified, the provided list will be merged into the base search domain names generated from the chosen DNS policy. Duplicate domain names are removed.

Kubernetes allows for at most 6 search domains.

subdomainOptional 
public readonly subdomain: string;
  • Type: string
  • Default: No subdomain.

If specified, the fully qualified Pod hostname will be “...svc.“.

PodProps

Properties for Pod.

Initializer 

import { PodProps } from 'cdk8s-plus-30'

const podProps: PodProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountServiceAccountTokenOptional 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether a service account token should be automatically mounted.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

containersOptional 
public readonly containers: ContainerProps[];

List of containers belonging to the pod.

Containers cannot currently be added or removed. There must be at least one container in a Pod.

You can add additionnal containers using podSpec.addContainer()

dnsOptional 
public readonly dns: PodDnsProps;

DNS settings for the pod.

https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/

dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;

A secret containing docker credentials for authenticating to a registry.

hostAliasesOptional 
public readonly hostAliases: HostAlias[];

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
  • Default: false

Host network for the pod.

initContainersOptional 
public readonly initContainers: ContainerProps[];

List of initialization containers belonging to the pod.

Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion.

Init containers cannot currently be added ,removed or updated.

https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

isolateOptional 
public readonly isolate: boolean;
  • Type: boolean
  • Default: false

Isolates the pod.

This will prevent any ingress or egress connections to / from this pod. You can however allow explicit connections post instantiation by using the .connections property.

restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;

Restart policy for all containers within the pod.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

securityContextOptional 
public readonly securityContext: PodSecurityContextProps;

SecurityContext holds pod-level security attributes and common container settings.

serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

Grace period until the pod is terminated.

volumesOptional 
public readonly volumes: Volume[];

List of volumes that can be mounted by containers belonging to the pod.

You can also add volumes later using podSpec.addVolume()

https://kubernetes.io/docs/concepts/storage/volumes

PodsAllOptions

Options for Pods.all.

Initializer 

import { PodsAllOptions } from 'cdk8s-plus-30'

const podsAllOptions: PodsAllOptions = { ... }
namespacesOptional 
public readonly namespaces: Namespaces;

Namespaces the pods are allowed to be in.

Use Namespaces.all() to allow all namespaces.

PodSchedulingAttractOptions

Options for PodScheduling.attract.

Initializer 

import { PodSchedulingAttractOptions } from 'cdk8s-plus-30'

const podSchedulingAttractOptions: PodSchedulingAttractOptions = { ... }
weightOptional 
public readonly weight: number;
  • Type: number
  • Default: no weight. assignment is assumed to be required (hard).

Indicates the attraction is optional (soft), with this weight score.

PodSchedulingColocateOptions

Options for PodScheduling.colocate.

Initializer 

import { PodSchedulingColocateOptions } from 'cdk8s-plus-30'

const podSchedulingColocateOptions: PodSchedulingColocateOptions = { ... }
topologyOptional 
public readonly topology: Topology;

Which topology to coloate on.

weightOptional 
public readonly weight: number;
  • Type: number
  • Default: no weight. co-location is assumed to be required (hard).

Indicates the co-location is optional (soft), with this weight score.

PodSchedulingSeparateOptions

Options for PodScheduling.separate.

Initializer 

import { PodSchedulingSeparateOptions } from 'cdk8s-plus-30'

const podSchedulingSeparateOptions: PodSchedulingSeparateOptions = { ... }
topologyOptional 
public readonly topology: Topology;

Which topology to separate on.

weightOptional 
public readonly weight: number;
  • Type: number
  • Default: no weight. separation is assumed to be required (hard).

Indicates the separation is optional (soft), with this weight score.

PodSecurityContextProps

Properties for PodSecurityContext.

Initializer 

import { PodSecurityContextProps } from 'cdk8s-plus-30'

const podSecurityContextProps: PodSecurityContextProps = { ... }
ensureNonRootOptional 
public readonly ensureNonRoot: boolean;
  • Type: boolean
  • Default: true

Indicates that the container must run as a non-root user.

If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does.

fsGroupOptional 
public readonly fsGroup: number;
  • Type: number
  • Default: Volume ownership is not changed.

Modify the ownership and permissions of pod volumes to this GID.

fsGroupChangePolicyOptional 
public readonly fsGroupChangePolicy: FsGroupChangePolicy;

Defines behavior of changing ownership and permission of the volume before being exposed inside Pod.

This field will only apply to volume types which support fsGroup based ownership(and permissions). It will have no effect on ephemeral volume types such as: secret, configmaps and emptydir.

groupOptional 
public readonly group: number;
  • Type: number
  • Default: Group configured by container runtime

The GID to run the entrypoint of the container process.

sysctlsOptional 
public readonly sysctls: Sysctl[];

Sysctls hold a list of namespaced sysctls used for the pod.

Pods with unsupported sysctls (by the container runtime) might fail to launch.

userOptional 
public readonly user: number;
  • Type: number
  • Default: User specified in image metadata

The UID to run the entrypoint of the container process.

PodSelectorConfig

Configuration for selecting pods, optionally in particular namespaces.

Initializer 

import { PodSelectorConfig } from 'cdk8s-plus-30'

const podSelectorConfig: PodSelectorConfig = { ... }
labelSelectorRequired 
public readonly labelSelector: LabelSelector;

A selector to select pods by labels.

namespacesOptional 
public readonly namespaces: NamespaceSelectorConfig;

Configuration for selecting which namepsaces are the pods allowed to be in.

PodsSelectOptions

Options for Pods.select.

Initializer 

import { PodsSelectOptions } from 'cdk8s-plus-30'

const podsSelectOptions: PodsSelectOptions = { ... }
expressionsOptional 
public readonly expressions: LabelExpression[];

Expressions the pods must satisify.

labelsOptional 
public readonly labels: {[ key: string ]: string};
  • Type: {[ key: string ]: string}
  • Default: no strict labels requirements.

Labels the pods must have.

namespacesOptional 
public readonly namespaces: Namespaces;

Namespaces the pods are allowed to be in.

Use Namespaces.all() to allow all namespaces.

ProbeOptions

Probe options.

Initializer 

import { ProbeOptions } from 'cdk8s-plus-30'

const probeOptions: ProbeOptions = { ... }
failureThresholdOptional 
public readonly failureThreshold: number;
  • Type: number
  • Default: 3

Minimum consecutive failures for the probe to be considered failed after having succeeded.

Defaults to 3. Minimum value is 1.

initialDelaySecondsOptional 
public readonly initialDelaySeconds: Duration;

Number of seconds after the container has started before liveness probes are initiated.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSecondsOptional 
public readonly periodSeconds: Duration;
  • Type: cdk8s.Duration
  • Default: Duration.seconds(10) Minimum value is 1.

How often (in seconds) to perform the probe.

Default to 10 seconds. Minimum value is 1.

successThresholdOptional 
public readonly successThreshold: number;
  • Type: number
  • Default: 1 Must be 1 for liveness and startup. Minimum value is 1.

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1.

Must be 1 for liveness and startup. Minimum value is 1.

timeoutSecondsOptional 
public readonly timeoutSeconds: Duration;

Number of seconds after which the probe times out.

Defaults to 1 second. Minimum value is 1.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

ResourceProps

Initialization properties for resources.

Initializer 

import { ResourceProps } from 'cdk8s-plus-30'

const resourceProps: ResourceProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

RoleBindingProps

Properties for RoleBinding.

Initializer 

import { RoleBindingProps } from 'cdk8s-plus-30'

const roleBindingProps: RoleBindingProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

roleRequired 
public readonly role: IRole;

The role to bind to.

A RoleBinding can reference a Role or a ClusterRole.

RolePolicyRule

Policy rule of a `Role.

Initializer 

import { RolePolicyRule } from 'cdk8s-plus-30'

const rolePolicyRule: RolePolicyRule = { ... }
resourcesRequired 
public readonly resources: IApiResource[];

Resources this rule applies to.

verbsRequired 
public readonly verbs: string[];
  • Type: string[]

Verbs to allow.

(e.g [‘get’, ‘watch’])

RoleProps

Properties for Role.

Initializer 

import { RoleProps } from 'cdk8s-plus-30'

const roleProps: RoleProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

rulesOptional 
public readonly rules: RolePolicyRule[];

A list of rules the role should allow.

ScalingPolicy

Initializer 

import { ScalingPolicy } from 'cdk8s-plus-30'

const scalingPolicy: ScalingPolicy = { ... }
replicasRequired 
public readonly replicas: Replicas;

The type and quantity of replicas to change.

durationOptional 
public readonly duration: Duration;

The amount of time the scaling policy has to continue scaling before the target metric must be revalidated.

Must be greater than 0 seconds and no longer than 30 minutes.

ScalingRules

Defines the scaling behavior for one direction.

Initializer 

import { ScalingRules } from 'cdk8s-plus-30'

const scalingRules: ScalingRules = { ... }
policiesOptional 
public readonly policies: ScalingPolicy[];
  • Type: cdk8s-plus-30.ScalingPolicy[]
  • Default: * Scale up
  • Increase no more than 4 pods per 60 seconds
  • Double the number of pods per 60 seconds
  • Scale down
  • Decrease to minReplica count

The scaling policies.

stabilizationWindowOptional 
public readonly stabilizationWindow: Duration;
  • Type: cdk8s.Duration
  • Default: * On scale down no stabilization is performed.
  • On scale up stabilization is performed for 5 minutes.

Defines the window of past metrics that the autoscaler should consider when calculating wether or not autoscaling should occur.

Minimum duration is 1 second, max is 1 hour.

strategyOptional 
public readonly strategy: ScalingStrategy;

The strategy to use when scaling.

ScalingTarget

Properties used to configure the target of an Autoscaler.

Initializer 

import { ScalingTarget } from 'cdk8s-plus-30'

const scalingTarget: ScalingTarget = { ... }
apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

containersRequired 
public readonly containers: Container[];

Container definitions associated with the target.

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

replicasOptional 
public readonly replicas: number;
  • Type: number

The fixed number of replicas defined on the target.

This is used for validation purposes as Scalable targets should not have a fixed number of replicas.

SeccompProfile

Initializer 

import { SeccompProfile } from 'cdk8s-plus-30'

const seccompProfile: SeccompProfile = { ... }
typeRequired 
public readonly type: SeccompProfileType;

Indicates which kind of seccomp profile will be applied.

localhostProfileOptional 
public readonly localhostProfile: string;
  • Type: string
  • Default: empty string

localhostProfile indicates a profile defined in a file on the node should be used.

The profile must be preconfigured on the node to work. Must be a descending path, relative to the kubelet’s configured seccomp profile location. Must only be set if type is “Localhost”.

SecretProps

Options for Secret.

Initializer 

import { SecretProps } from 'cdk8s-plus-30'

const secretProps: SecretProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

immutableOptional 
public readonly immutable: boolean;
  • Type: boolean
  • Default: false

If set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified).

If not set to true, the field can be modified at any time.

stringDataOptional 
public readonly stringData: {[ key: string ]: string};
  • Type: {[ key: string ]: string}

stringData allows specifying non-binary secret data in string form.

It is provided as a write-only convenience method. All keys and values are merged into the data field on write, overwriting any existing values. It is never output when reading from the API.

typeOptional 
public readonly type: string;
  • Type: string
  • Default: undefined - Don’t set a type.

Optional type associated with the secret.

Used to facilitate programmatic handling of secret data by various controllers.

SecretValue

Represents a specific value in JSON secret.

Initializer 

import { SecretValue } from 'cdk8s-plus-30'

const secretValue: SecretValue = { ... }
keyRequired 
public readonly key: string;
  • Type: string

The JSON key.

secretRequired 
public readonly secret: ISecret;

The secret.

SecretVolumeOptions

Options for the Secret-based volume.

Initializer 

import { SecretVolumeOptions } from 'cdk8s-plus-30'

const secretVolumeOptions: SecretVolumeOptions = { ... }
defaultModeOptional 
public readonly defaultMode: number;
  • Type: number
  • Default: 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

Mode bits to use on created files by default.

Must be a value between 0 and 0777. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.

itemsOptional 
public readonly items: {[ key: string ]: PathMapping};

If unspecified, each key-value pair in the Data field of the referenced secret will be projected into the volume as a file whose name is the key and content is the value.

If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the ‘..’ path or start with ‘..’.

nameOptional 
public readonly name: string;
  • Type: string
  • Default: auto-generated

The volume name.

optionalOptional 
public readonly optional: boolean;
  • Type: boolean
  • Default: undocumented

Specify whether the secret or its keys must be defined.

ServiceAccountProps

Properties for initialization of ServiceAccount.

Initializer 

import { ServiceAccountProps } from 'cdk8s-plus-30'

const serviceAccountProps: ServiceAccountProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountTokenOptional 
public readonly automountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether pods running as this service account should have an API token automatically mounted.

Can be overridden at the pod level.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

secretsOptional 
public readonly secrets: ISecret[];

List of secrets allowed to be used by pods running using this ServiceAccount.

https://kubernetes.io/docs/concepts/configuration/secret

ServiceAccountTokenSecretProps

Options for ServiceAccountTokenSecret.

Initializer 

import { ServiceAccountTokenSecretProps } from 'cdk8s-plus-30'

const serviceAccountTokenSecretProps: ServiceAccountTokenSecretProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

immutableOptional 
public readonly immutable: boolean;
  • Type: boolean
  • Default: false

If set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified).

If not set to true, the field can be modified at any time.

serviceAccountRequired 
public readonly serviceAccount: IServiceAccount;

The service account to store a secret for.

ServiceBindOptions

Options for Service.bind.

Initializer 

import { ServiceBindOptions } from 'cdk8s-plus-30'

const serviceBindOptions: ServiceBindOptions = { ... }
nameOptional 
public readonly name: string;
  • Type: string

The name of this port within the service.

This must be a DNS_LABEL. All ports within a ServiceSpec must have unique names. This maps to the ‘Name’ field in EndpointPort objects. Optional if only one ServicePort is defined on this service.

nodePortOptional 
public readonly nodePort: number;
  • Type: number
  • Default: auto-allocate a port if the ServiceType of this Service requires one.

The port on each node on which this service is exposed when type=NodePort or LoadBalancer.

Usually assigned by the system. If specified, it will be allocated to the service if unused or else creation of the service will fail. Default is to auto-allocate a port if the ServiceType of this Service requires one.

https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport

protocolOptional 
public readonly protocol: Protocol;

The IP protocol for this port.

Supports “TCP”, “UDP”, and “SCTP”. Default is TCP.

targetPortOptional 
public readonly targetPort: number;
  • Type: number
  • Default: The value of port will be used.

The port number the service will redirect to.

ServiceIngressBackendOptions

Options for setting up backends for ingress rules.

Initializer 

import { ServiceIngressBackendOptions } from 'cdk8s-plus-30'

const serviceIngressBackendOptions: ServiceIngressBackendOptions = { ... }
portOptional 
public readonly port: number;
  • Type: number
  • Default: if the service exposes a single port, this port will be used.

The port to use to access the service.

This option will fail if the service does not expose any ports. - If the service exposes multiple ports, this option must be specified. - If the service exposes a single port, this option is optional and if specified, it must be the same port exposed by the service.

ServicePort

Definition of a service port.

Initializer 

import { ServicePort } from 'cdk8s-plus-30'

const servicePort: ServicePort = { ... }
nameOptional 
public readonly name: string;
  • Type: string

The name of this port within the service.

This must be a DNS_LABEL. All ports within a ServiceSpec must have unique names. This maps to the ‘Name’ field in EndpointPort objects. Optional if only one ServicePort is defined on this service.

nodePortOptional 
public readonly nodePort: number;
  • Type: number
  • Default: auto-allocate a port if the ServiceType of this Service requires one.

The port on each node on which this service is exposed when type=NodePort or LoadBalancer.

Usually assigned by the system. If specified, it will be allocated to the service if unused or else creation of the service will fail. Default is to auto-allocate a port if the ServiceType of this Service requires one.

https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport

protocolOptional 
public readonly protocol: Protocol;

The IP protocol for this port.

Supports “TCP”, “UDP”, and “SCTP”. Default is TCP.

targetPortOptional 
public readonly targetPort: number;
  • Type: number
  • Default: The value of port will be used.

The port number the service will redirect to.

portRequired 
public readonly port: number;
  • Type: number

The port number the service will bind to.

ServiceProps

Properties for Service.

Initializer 

import { ServiceProps } from 'cdk8s-plus-30'

const serviceProps: ServiceProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

clusterIPOptional 
public readonly clusterIP: string;
  • Type: string
  • Default: Automatically assigned.

The IP address of the service and is usually assigned randomly by the master.

If an address is specified manually and is not in use by others, it will be allocated to the service; otherwise, creation of the service will fail. This field can not be changed through updates. Valid values are “None”, empty string (“”), or a valid IP address. “None” can be specified for headless services when proxying is not required. Only applies to types ClusterIP, NodePort, and LoadBalancer. Ignored if type is ExternalName.

https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies

externalIPsOptional 
public readonly externalIPs: string[];
  • Type: string[]
  • Default: No external IPs.

A list of IP addresses for which nodes in the cluster will also accept traffic for this service.

These IPs are not managed by Kubernetes. The user is responsible for ensuring that traffic arrives at a node with this IP. A common example is external load-balancers that are not part of the Kubernetes system.

externalNameOptional 
public readonly externalName: string;
  • Type: string
  • Default: No external name.

The externalName to be used when ServiceType.EXTERNAL_NAME is set.

loadBalancerSourceRangesOptional 
public readonly loadBalancerSourceRanges: string[];
  • Type: string[]

A list of CIDR IP addresses, if specified and supported by the platform, will restrict traffic through the cloud-provider load-balancer to the specified client IPs.

More info: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/

portsOptional 
public readonly ports: ServicePort[];

The ports this service binds to.

If the selector of the service is a managed pod / workload, its ports will are automatically extracted and used as the default value. Otherwise, no ports are bound.

publishNotReadyAddressesOptional 
public readonly publishNotReadyAddresses: boolean;
  • Type: boolean
  • Default: false

The publishNotReadyAddresses indicates that any agent which deals with endpoints for this Service should disregard any indications of ready/not-ready.

More info: https://kubernetes.io/docs/reference/generated/kubernetes-api/v1.30/#servicespec-v1-core

selectorOptional 
public readonly selector: IPodSelector;
  • Type: cdk8s-plus-30.IPodSelector
  • Default: unset, the service is assumed to have an external process managing its endpoints, which Kubernetes will not modify.

Which pods should the service select and route to.

You can pass one of the following:

  • An instance of Pod or any workload resource (e.g Deployment, StatefulSet, …)
  • Pods selected by the Pods.select function. Note that in this case only labels can be specified.
typeOptional 
public readonly type: ServiceType;

Determines how the Service is exposed.

More info: https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-types

SshAuthSecretProps

Options for SshAuthSecret.

Initializer 

import { SshAuthSecretProps } from 'cdk8s-plus-30'

const sshAuthSecretProps: SshAuthSecretProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

immutableOptional 
public readonly immutable: boolean;
  • Type: boolean
  • Default: false

If set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified).

If not set to true, the field can be modified at any time.

sshPrivateKeyRequired 
public readonly sshPrivateKey: string;
  • Type: string

The SSH private key to use.

StatefulSetProps

Properties for initialization of StatefulSet.

Initializer 

import { StatefulSetProps } from 'cdk8s-plus-30'

const statefulSetProps: StatefulSetProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountServiceAccountTokenOptional 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether a service account token should be automatically mounted.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

containersOptional 
public readonly containers: ContainerProps[];

List of containers belonging to the pod.

Containers cannot currently be added or removed. There must be at least one container in a Pod.

You can add additionnal containers using podSpec.addContainer()

dnsOptional 
public readonly dns: PodDnsProps;

DNS settings for the pod.

https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/

dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;

A secret containing docker credentials for authenticating to a registry.

hostAliasesOptional 
public readonly hostAliases: HostAlias[];

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
  • Default: false

Host network for the pod.

initContainersOptional 
public readonly initContainers: ContainerProps[];

List of initialization containers belonging to the pod.

Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion.

Init containers cannot currently be added ,removed or updated.

https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

isolateOptional 
public readonly isolate: boolean;
  • Type: boolean
  • Default: false

Isolates the pod.

This will prevent any ingress or egress connections to / from this pod. You can however allow explicit connections post instantiation by using the .connections property.

restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;

Restart policy for all containers within the pod.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

securityContextOptional 
public readonly securityContext: PodSecurityContextProps;

SecurityContext holds pod-level security attributes and common container settings.

serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

Grace period until the pod is terminated.

volumesOptional 
public readonly volumes: Volume[];

List of volumes that can be mounted by containers belonging to the pod.

You can also add volumes later using podSpec.addVolume()

https://kubernetes.io/docs/concepts/storage/volumes

podMetadataOptional 
public readonly podMetadata: ApiObjectMetadata;

The pod metadata of this workload.

selectOptional 
public readonly select: boolean;
  • Type: boolean
  • Default: true

Automatically allocates a pod label selector for this workload and add it to the pod metadata.

This ensures this workload manages pods created by its pod template.

spreadOptional 
public readonly spread: boolean;
  • Type: boolean
  • Default: false

Automatically spread pods across hostname and zones.

https://kubernetes.io/docs/concepts/scheduling-eviction/topology-spread-constraints/#internal-default-constraints

minReadyOptional 
public readonly minReady: Duration;

Minimum duration for which a newly created pod should be ready without any of its container crashing, for it to be considered available.

Zero means the pod will be considered available as soon as it is ready.

This is an alpha field and requires enabling StatefulSetMinReadySeconds feature gate.

https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#min-ready-seconds

podManagementPolicyOptional 
public readonly podManagementPolicy: PodManagementPolicy;

Pod management policy to use for this statefulset.

replicasOptional 
public readonly replicas: number;
  • Type: number
  • Default: 1

Number of desired pods.

serviceOptional 
public readonly service: Service;

Service to associate with the statefulset.

strategyOptional 
public readonly strategy: StatefulSetUpdateStrategy;

Indicates the StatefulSetUpdateStrategy that will be employed to update Pods in the StatefulSet when a revision is made to Template.

StatefulSetUpdateStrategyRollingUpdateOptions

Options for StatefulSetUpdateStrategy.rollingUpdate.

Initializer 

import { StatefulSetUpdateStrategyRollingUpdateOptions } from 'cdk8s-plus-30'

const statefulSetUpdateStrategyRollingUpdateOptions: StatefulSetUpdateStrategyRollingUpdateOptions = { ... }
partitionOptional 
public readonly partition: number;
  • Type: number
  • Default: 0

If specified, all Pods with an ordinal that is greater than or equal to the partition will be updated when the StatefulSet’s .spec.template is updated. All Pods with an ordinal that is less than the partition will not be updated, and, even if they are deleted, they will be recreated at the previous version.

If the partition is greater than replicas, updates to the pod template will not be propagated to Pods. In most cases you will not need to use a partition, but they are useful if you want to stage an update, roll out a canary, or perform a phased roll out.

https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#partitions

SubjectConfiguration

Subject contains a reference to the object or user identities a role binding applies to.

This can either hold a direct API object reference, or a value for non-objects such as user and group names.

Initializer 

import { SubjectConfiguration } from 'cdk8s-plus-30'

const subjectConfiguration: SubjectConfiguration = { ... }
kindRequired 
public readonly kind: string;
  • Type: string

Kind of object being referenced.

Values defined by this API group are “User”, “Group”, and “ServiceAccount”. If the Authorizer does not recognized the kind value, the Authorizer should report an error.

nameRequired 
public readonly name: string;
  • Type: string

Name of the object being referenced.

apiGroupOptional 
public readonly apiGroup: string;
  • Type: string

APIGroup holds the API group of the referenced subject.

Defaults to “” for ServiceAccount subjects. Defaults to “rbac.authorization.k8s.io” for User and Group subjects.

namespaceOptional 
public readonly namespace: string;
  • Type: string

Namespace of the referenced object.

If the object kind is non-namespace, such as “User” or “Group”, and this value is not empty the Authorizer should report an error.

Sysctl

Sysctl defines a kernel parameter to be set.

Initializer 

import { Sysctl } from 'cdk8s-plus-30'

const sysctl: Sysctl = { ... }
nameRequired 
public readonly name: string;
  • Type: string

Name of a property to set.

valueRequired 
public readonly value: string;
  • Type: string

Value of a property to set.

TcpSocketProbeOptions

Options for Probe.fromTcpSocket().

Initializer 

import { TcpSocketProbeOptions } from 'cdk8s-plus-30'

const tcpSocketProbeOptions: TcpSocketProbeOptions = { ... }
failureThresholdOptional 
public readonly failureThreshold: number;
  • Type: number
  • Default: 3

Minimum consecutive failures for the probe to be considered failed after having succeeded.

Defaults to 3. Minimum value is 1.

initialDelaySecondsOptional 
public readonly initialDelaySeconds: Duration;

Number of seconds after the container has started before liveness probes are initiated.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

periodSecondsOptional 
public readonly periodSeconds: Duration;
  • Type: cdk8s.Duration
  • Default: Duration.seconds(10) Minimum value is 1.

How often (in seconds) to perform the probe.

Default to 10 seconds. Minimum value is 1.

successThresholdOptional 
public readonly successThreshold: number;
  • Type: number
  • Default: 1 Must be 1 for liveness and startup. Minimum value is 1.

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1.

Must be 1 for liveness and startup. Minimum value is 1.

timeoutSecondsOptional 
public readonly timeoutSeconds: Duration;

Number of seconds after which the probe times out.

Defaults to 1 second. Minimum value is 1.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

hostOptional 
public readonly host: string;
  • Type: string
  • Default: defaults to the pod IP

The host name to connect to on the container.

portOptional 
public readonly port: number;
  • Type: number
  • Default: defaults to container.port.

The TCP port to connect to on the container.

TlsSecretProps

Options for TlsSecret.

Initializer 

import { TlsSecretProps } from 'cdk8s-plus-30'

const tlsSecretProps: TlsSecretProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

immutableOptional 
public readonly immutable: boolean;
  • Type: boolean
  • Default: false

If set to true, ensures that data stored in the Secret cannot be updated (only object metadata can be modified).

If not set to true, the field can be modified at any time.

tlsCertRequired 
public readonly tlsCert: string;
  • Type: string

The TLS cert.

tlsKeyRequired 
public readonly tlsKey: string;
  • Type: string

The TLS key.

VolumeMount

Mount a volume from the pod to the container.

Initializer 

import { VolumeMount } from 'cdk8s-plus-30'

const volumeMount: VolumeMount = { ... }
propagationOptional 
public readonly propagation: MountPropagation;

Determines how mounts are propagated from the host to container and the other way around.

When not set, MountPropagationNone is used.

Mount propagation allows for sharing volumes mounted by a Container to other Containers in the same Pod, or even to other Pods on the same node.

readOnlyOptional 
public readonly readOnly: boolean;
  • Type: boolean
  • Default: false

Mounted read-only if true, read-write otherwise (false or unspecified).

Defaults to false.

subPathOptional 
public readonly subPath: string;
  • Type: string
  • Default: “” the volume’s root

Path within the volume from which the container’s volume should be mounted.).

subPathExprOptional 
public readonly subPathExpr: string;
  • Type: string
  • Default: “” volume’s root.

Expanded path within the volume from which the container’s volume should be mounted.

Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container’s environment. Defaults to “” (volume’s root).

subPathExpr and subPath are mutually exclusive.

pathRequired 
public readonly path: string;
  • Type: string

Path within the container at which the volume should be mounted.

Must not contain ‘:’.

volumeRequired 
public readonly volume: Volume;

The volume to mount.

WorkloadProps

Properties for Workload.

Initializer 

import { WorkloadProps } from 'cdk8s-plus-30'

const workloadProps: WorkloadProps = { ... }
metadataOptional 
public readonly metadata: ApiObjectMetadata;

Metadata that all persisted resources must have, which includes all objects users must create.

automountServiceAccountTokenOptional 
public readonly automountServiceAccountToken: boolean;
  • Type: boolean
  • Default: false

Indicates whether a service account token should be automatically mounted.

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server

containersOptional 
public readonly containers: ContainerProps[];

List of containers belonging to the pod.

Containers cannot currently be added or removed. There must be at least one container in a Pod.

You can add additionnal containers using podSpec.addContainer()

dnsOptional 
public readonly dns: PodDnsProps;

DNS settings for the pod.

https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/

dockerRegistryAuthOptional 
public readonly dockerRegistryAuth: ISecret;

A secret containing docker credentials for authenticating to a registry.

hostAliasesOptional 
public readonly hostAliases: HostAlias[];

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostNetworkOptional 
public readonly hostNetwork: boolean;
  • Type: boolean
  • Default: false

Host network for the pod.

initContainersOptional 
public readonly initContainers: ContainerProps[];

List of initialization containers belonging to the pod.

Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion.

Init containers cannot currently be added ,removed or updated.

https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

isolateOptional 
public readonly isolate: boolean;
  • Type: boolean
  • Default: false

Isolates the pod.

This will prevent any ingress or egress connections to / from this pod. You can however allow explicit connections post instantiation by using the .connections property.

restartPolicyOptional 
public readonly restartPolicy: RestartPolicy;

Restart policy for all containers within the pod.

https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy

securityContextOptional 
public readonly securityContext: PodSecurityContextProps;

SecurityContext holds pod-level security attributes and common container settings.

serviceAccountOptional 
public readonly serviceAccount: IServiceAccount;

A service account provides an identity for processes that run in a Pod.

When you (a human) access the cluster (for example, using kubectl), you are authenticated by the apiserver as a particular User Account (currently this is usually admin, unless your cluster administrator has customized your cluster). Processes in containers inside pods can also contact the apiserver. When they do, they are authenticated as a particular Service Account (for example, default).

https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/

terminationGracePeriodOptional 
public readonly terminationGracePeriod: Duration;

Grace period until the pod is terminated.

volumesOptional 
public readonly volumes: Volume[];

List of volumes that can be mounted by containers belonging to the pod.

You can also add volumes later using podSpec.addVolume()

https://kubernetes.io/docs/concepts/storage/volumes

podMetadataOptional 
public readonly podMetadata: ApiObjectMetadata;

The pod metadata of this workload.

selectOptional 
public readonly select: boolean;
  • Type: boolean
  • Default: true

Automatically allocates a pod label selector for this workload and add it to the pod metadata.

This ensures this workload manages pods created by its pod template.

spreadOptional 
public readonly spread: boolean;
  • Type: boolean
  • Default: false

Automatically spread pods across hostname and zones.

https://kubernetes.io/docs/concepts/scheduling-eviction/topology-spread-constraints/#internal-default-constraints

WorkloadSchedulingSpreadOptions

Options for WorkloadScheduling.spread.

Initializer 

import { WorkloadSchedulingSpreadOptions } from 'cdk8s-plus-30'

const workloadSchedulingSpreadOptions: WorkloadSchedulingSpreadOptions = { ... }
topologyOptional 
public readonly topology: Topology;

Which topology to spread on.

weightOptional 
public readonly weight: number;
  • Type: number
  • Default: no weight. spread is assumed to be required.

Indicates the spread is optional, with this weight score.

Classes

ApiResource

Represents information about an API resource type.

Methods

asApiResource 
public asApiResource()
asNonApiResource 
public asNonApiResource()

Static Functions

custom 
import { ApiResource } from 'cdk8s-plus-30'

ApiResource.custom(options: ApiResourceOptions)
optionsRequired

Properties

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of the resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

Constants

API_SERVICES

API resource information for APIService.

BINDINGS

API resource information for Binding.

CERTIFICATE_SIGNING_REQUESTS

API resource information for CertificateSigningRequest.

CLUSTER_ROLE_BINDINGS

API resource information for ClusterRoleBinding.

CLUSTER_ROLES

API resource information for ClusterRole.

COMPONENT_STATUSES

API resource information for ComponentStatus.

CONFIG_MAPS

API resource information for ConfigMap.

CONTROLLER_REVISIONS

API resource information for ControllerRevision.

CRON_JOBS

API resource information for CronJob.

CSI_DRIVERS

API resource information for CSIDriver.

CSI_NODES

API resource information for CSINode.

CSI_STORAGE_CAPACITIES

API resource information for CSIStorageCapacity.

CUSTOM_RESOURCE_DEFINITIONS

API resource information for CustomResourceDefinition.

DAEMON_SETS

API resource information for DaemonSet.

DEPLOYMENTS

API resource information for Deployment.

ENDPOINT_SLICES

API resource information for EndpointSlice.

ENDPOINTS

API resource information for Endpoints.

EVENTS

API resource information for Event.

FLOW_SCHEMAS

API resource information for FlowSchema.

HORIZONTAL_POD_AUTOSCALERS

API resource information for HorizontalPodAutoscaler.

INGRESS_CLASSES

API resource information for IngressClass.

INGRESSES

API resource information for Ingress.

JOBS

API resource information for Job.

LEASES

API resource information for Lease.

LIMIT_RANGES

API resource information for LimitRange.

LOCAL_SUBJECT_ACCESS_REVIEWS

API resource information for LocalSubjectAccessReview.

MUTATING_WEBHOOK_CONFIGURATIONS

API resource information for MutatingWebhookConfiguration.

NAMESPACES

API resource information for Namespace.

NETWORK_POLICIES

API resource information for NetworkPolicy.

NODES

API resource information for Node.

PERSISTENT_VOLUME_CLAIMS

API resource information for PersistentVolumeClaim.

PERSISTENT_VOLUMES

API resource information for PersistentVolume.

POD_DISRUPTION_BUDGETS

API resource information for PodDisruptionBudget.

POD_TEMPLATES

API resource information for PodTemplate.

PODS

API resource information for Pod.

PRIORITY_CLASSES

API resource information for PriorityClass.

PRIORITY_LEVEL_CONFIGURATIONS

API resource information for PriorityLevelConfiguration.

REPLICA_SETS

API resource information for ReplicaSet.

REPLICATION_CONTROLLERS

API resource information for ReplicationController.

RESOURCE_QUOTAS

API resource information for ResourceQuota.

ROLE_BINDINGS

API resource information for RoleBinding.

ROLES

API resource information for Role.

RUNTIME_CLASSES

API resource information for RuntimeClass.

SECRETS

API resource information for Secret.

SELF_SUBJECT_ACCESS_REVIEWS

API resource information for SelfSubjectAccessReview.

SELF_SUBJECT_RULES_REVIEWS

API resource information for SelfSubjectRulesReview.

SERVICE_ACCOUNTS

API resource information for ServiceAccount.

SERVICES

API resource information for Service.

STATEFUL_SETS

API resource information for StatefulSet.

STORAGE_CLASSES

API resource information for StorageClass.

SUBJECT_ACCESS_REVIEWS

API resource information for SubjectAccessReview.

TOKEN_REVIEWS

API resource information for TokenReview.

VALIDATING_WEBHOOK_CONFIGURATIONS

API resource information for ValidatingWebhookConfiguration.

VOLUME_ATTACHMENTS

API resource information for VolumeAttachment.

Container

A single application container that you want to run within a pod.

Initializers 

import { Container } from 'cdk8s-plus-30'

new Container(props: ContainerProps)
propsRequired

Methods

addPort 
public addPort(port: ContainerPort)
portRequired
mount 
public mount(path: string, storage: IStorage, options?: MountOptions)
pathRequired
  • Type: string

The desired path in the container.

storageRequired

The storage to mount.

optionsOptional

Properties

envRequired 
public readonly env: Env;

The environment of the container.

imageRequired 
public readonly image: string;
  • Type: string

The container image.

imagePullPolicyRequired 
public readonly imagePullPolicy: ImagePullPolicy;

Image pull policy for this container.

mountsRequired 
public readonly mounts: VolumeMount[];

Volume mounts configured for this container.

nameRequired 
public readonly name: string;
  • Type: string

The name of the container.

portsRequired 
public readonly ports: ContainerPort[];

Ports exposed by this containers.

Returns a copy, use addPort to modify.

securityContextRequired 
public readonly securityContext: ContainerSecurityContext;

The security context of the container.

argsOptional 
public readonly args: string[];
  • Type: string[]

Arguments to the entrypoint.

commandOptional 
public readonly command: string[];
  • Type: string[]

Entrypoint array (the command to execute when the container starts).

~~port~~Optional
  • Deprecated: - use portNumber.
public readonly port: number;
  • Type: number
portNumberOptional 
public readonly portNumber: number;
  • Type: number

The port number that was configured for this container.

If undefined, either the container doesn’t expose a port, or its port configuration is stored in the ports field.

resourcesOptional 
public readonly resources: ContainerResources;

Compute resources (CPU and memory requests and limits) required by the container.

https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

restartPolicyOptional 
public readonly restartPolicy: ContainerRestartPolicy;

The restart policy of the container.

workingDirOptional 
public readonly workingDir: string;
  • Type: string

The working directory inside the container.

ContainerSecurityContext

Container security attributes and settings.

Initializers 

import { ContainerSecurityContext } from 'cdk8s-plus-30'

new ContainerSecurityContext(props?: ContainerSecurityContextProps)
propsOptional

Properties

ensureNonRootRequired 
public readonly ensureNonRoot: boolean;
  • Type: boolean
privilegedRequired 
public readonly privileged: boolean;
  • Type: boolean
readOnlyRootFilesystemRequired 
public readonly readOnlyRootFilesystem: boolean;
  • Type: boolean
allowPrivilegeEscalationOptional 
public readonly allowPrivilegeEscalation: boolean;
  • Type: boolean
capabilitiesOptional 
public readonly capabilities: ContainerSecutiryContextCapabilities;
groupOptional 
public readonly group: number;
  • Type: number
seccompProfileOptional 
public readonly seccompProfile: SeccompProfile;
userOptional 
public readonly user: number;
  • Type: number

Cpu

Represents the amount of CPU.

The amount can be passed as millis or units.

Static Functions

millis 
import { Cpu } from 'cdk8s-plus-30'

Cpu.millis(amount: number)
amountRequired
  • Type: number
units 
import { Cpu } from 'cdk8s-plus-30'

Cpu.units(amount: number)
amountRequired
  • Type: number

Properties

amountRequired 
public readonly amount: string;
  • Type: string

DeploymentStrategy

Deployment strategies.

Static Functions

recreate 
import { DeploymentStrategy } from 'cdk8s-plus-30'

DeploymentStrategy.recreate()
rollingUpdate 
import { DeploymentStrategy } from 'cdk8s-plus-30'

DeploymentStrategy.rollingUpdate(options?: DeploymentStrategyRollingUpdateOptions)
optionsOptional

Env

Container environment variables.

Initializers 

import { Env } from 'cdk8s-plus-30'

new Env(sources: EnvFrom[], variables: {[ key: string ]: EnvValue})
sourcesRequired
variablesRequired

Methods

addVariable 
public addVariable(name: string, value: EnvValue)
nameRequired
  • Type: string
valueRequired
copyFrom 
public copyFrom(from: EnvFrom)
fromRequired

Static Functions

fromConfigMap 
import { Env } from 'cdk8s-plus-30'

Env.fromConfigMap(configMap: IConfigMap, prefix?: string)
configMapRequired
prefixOptional
  • Type: string
fromSecret 
import { Env } from 'cdk8s-plus-30'

Env.fromSecret(secr: ISecret)
secrRequired

Properties

sourcesRequired 
public readonly sources: EnvFrom[];

The list of sources used to populate the container environment, in addition to the variables.

Returns a copy. To add a source use container.env.copyFrom().

variablesRequired 
public readonly variables: {[ key: string ]: EnvValue};

The environment variables for this container.

Returns a copy. To add environment variables use container.env.addVariable().

EnvFrom

A collection of env variables defined in other resources.

Initializers 

import { EnvFrom } from 'cdk8s-plus-30'

new EnvFrom(configMap?: IConfigMap, prefix?: string, sec?: ISecret)
configMapOptional
prefixOptional
  • Type: string
secOptional

EnvValue

Utility class for creating reading env values from various sources.

Static Functions

fromConfigMap 
import { EnvValue } from 'cdk8s-plus-30'

EnvValue.fromConfigMap(configMap: IConfigMap, key: string, options?: EnvValueFromConfigMapOptions)
configMapRequired

The config map.

keyRequired
  • Type: string

The key to extract the value from.

optionsOptional

Additional options.

fromFieldRef 
import { EnvValue } from 'cdk8s-plus-30'

EnvValue.fromFieldRef(fieldPath: EnvFieldPaths, options?: EnvValueFromFieldRefOptions)
fieldPathRequired

: The field reference.

optionsOptional

: Additional options.

fromProcess 
import { EnvValue } from 'cdk8s-plus-30'

EnvValue.fromProcess(key: string, options?: EnvValueFromProcessOptions)
keyRequired
  • Type: string

The key to read.

optionsOptional

Additional options.

fromResource 
import { EnvValue } from 'cdk8s-plus-30'

EnvValue.fromResource(resource: ResourceFieldPaths, options?: EnvValueFromResourceOptions)
resourceRequired

: Resource to select the value from.

optionsOptional

: Additional options.

fromSecretValue 
import { EnvValue } from 'cdk8s-plus-30'

EnvValue.fromSecretValue(secretValue: SecretValue, options?: EnvValueFromSecretOptions)
secretValueRequired

The secret value (secrent + key).

optionsOptional

Additional options.

fromValue 
import { EnvValue } from 'cdk8s-plus-30'

EnvValue.fromValue(value: string)
valueRequired
  • Type: string

The value.

Properties

valueOptional 
public readonly value: any;
  • Type: any
valueFromOptional 
public readonly valueFrom: any;
  • Type: any

Handler

Defines a specific action that should be taken.

Static Functions

fromCommand 
import { Handler } from 'cdk8s-plus-30'

Handler.fromCommand(command: string[])
commandRequired
  • Type: string[]

The command to execute.

fromHttpGet 
import { Handler } from 'cdk8s-plus-30'

Handler.fromHttpGet(path: string, options?: HandlerFromHttpGetOptions)
pathRequired
  • Type: string

The URL path to hit.

optionsOptional

Options.

fromTcpSocket 
import { Handler } from 'cdk8s-plus-30'

Handler.fromTcpSocket(options?: HandlerFromTcpSocketOptions)
optionsOptional

Options.

IngressBackend

The backend for an ingress path.

Static Functions

fromResource 
import { IngressBackend } from 'cdk8s-plus-30'

IngressBackend.fromResource(resource: IResource)
resourceRequired
fromService 
import { IngressBackend } from 'cdk8s-plus-30'

IngressBackend.fromService(serv: Service, options?: ServiceIngressBackendOptions)
servRequired

The service object.

optionsOptional

LabeledNode

A node that is matched by label selectors.

Initializers 

import { LabeledNode } from 'cdk8s-plus-30'

new LabeledNode(labelSelector: NodeLabelQuery[])
labelSelectorRequired

Properties

labelSelectorRequired 
public readonly labelSelector: NodeLabelQuery[];

LabelExpression

Represents a query that can be performed against resources with labels.

Static Functions

doesNotExist 
import { LabelExpression } from 'cdk8s-plus-30'

LabelExpression.doesNotExist(key: string)
keyRequired
  • Type: string
exists 
import { LabelExpression } from 'cdk8s-plus-30'

LabelExpression.exists(key: string)
keyRequired
  • Type: string
in 
import { LabelExpression } from 'cdk8s-plus-30'

LabelExpression.in(key: string, values: string[])
keyRequired
  • Type: string
valuesRequired
  • Type: string[]
notIn 
import { LabelExpression } from 'cdk8s-plus-30'

LabelExpression.notIn(key: string, values: string[])
keyRequired
  • Type: string
valuesRequired
  • Type: string[]

Properties

keyRequired 
public readonly key: string;
  • Type: string
operatorRequired 
public readonly operator: string;
  • Type: string
valuesOptional 
public readonly values: string[];
  • Type: string[]

LabelSelector

Match a resource by labels.

Methods

isEmpty 
public isEmpty()

Static Functions

of 
import { LabelSelector } from 'cdk8s-plus-30'

LabelSelector.of(options?: LabelSelectorOptions)
optionsOptional

Metric

A metric condition that HorizontalPodAutoscaler’s scale on.

Static Functions

containerCpu 
import { Metric } from 'cdk8s-plus-30'

Metric.containerCpu(options: MetricContainerResourceOptions)
optionsRequired
containerEphemeralStorage 
import { Metric } from 'cdk8s-plus-30'

Metric.containerEphemeralStorage(options: MetricContainerResourceOptions)
optionsRequired
containerMemory 
import { Metric } from 'cdk8s-plus-30'

Metric.containerMemory(options: MetricContainerResourceOptions)
optionsRequired
containerStorage 
import { Metric } from 'cdk8s-plus-30'

Metric.containerStorage(options: MetricContainerResourceOptions)
optionsRequired
external 
import { Metric } from 'cdk8s-plus-30'

Metric.external(options: MetricOptions)
optionsRequired
object 
import { Metric } from 'cdk8s-plus-30'

Metric.object(options: MetricObjectOptions)
optionsRequired
pods 
import { Metric } from 'cdk8s-plus-30'

Metric.pods(options: MetricOptions)
optionsRequired
resourceCpu 
import { Metric } from 'cdk8s-plus-30'

Metric.resourceCpu(target: MetricTarget)
targetRequired
resourceEphemeralStorage 
import { Metric } from 'cdk8s-plus-30'

Metric.resourceEphemeralStorage(target: MetricTarget)
targetRequired
resourceMemory 
import { Metric } from 'cdk8s-plus-30'

Metric.resourceMemory(target: MetricTarget)
targetRequired
resourceStorage 
import { Metric } from 'cdk8s-plus-30'

Metric.resourceStorage(target: MetricTarget)
targetRequired

Properties

typeRequired 
public readonly type: string;
  • Type: string

MetricTarget

A metric condition that will trigger scaling behavior when satisfied.

Static Functions

averageUtilization 
import { MetricTarget } from 'cdk8s-plus-30'

MetricTarget.averageUtilization(averageUtilization: number)
averageUtilizationRequired
  • Type: number

The percentage of the utilization metric.

e.g. 50 for 50%.

averageValue 
import { MetricTarget } from 'cdk8s-plus-30'

MetricTarget.averageValue(averageValue: number)
averageValueRequired
  • Type: number

The average metric value.

value 
import { MetricTarget } from 'cdk8s-plus-30'

MetricTarget.value(value: number)
valueRequired
  • Type: number

The target value.

NamedNode

A node that is matched by its name.

Initializers 

import { NamedNode } from 'cdk8s-plus-30'

new NamedNode(name: string)
nameRequired
  • Type: string

Properties

nameRequired 
public readonly name: string;
  • Type: string

NetworkPolicyPort

Describes a port to allow traffic on.

Static Functions

allTcp 
import { NetworkPolicyPort } from 'cdk8s-plus-30'

NetworkPolicyPort.allTcp()
allUdp 
import { NetworkPolicyPort } from 'cdk8s-plus-30'

NetworkPolicyPort.allUdp()
of 
import { NetworkPolicyPort } from 'cdk8s-plus-30'

NetworkPolicyPort.of(props: NetworkPolicyPortProps)
propsRequired
tcp 
import { NetworkPolicyPort } from 'cdk8s-plus-30'

NetworkPolicyPort.tcp(port: number)
portRequired
  • Type: number
tcpRange 
import { NetworkPolicyPort } from 'cdk8s-plus-30'

NetworkPolicyPort.tcpRange(startPort: number, endPort: number)
startPortRequired
  • Type: number
endPortRequired
  • Type: number
udp 
import { NetworkPolicyPort } from 'cdk8s-plus-30'

NetworkPolicyPort.udp(port: number)
portRequired
  • Type: number
udpRange 
import { NetworkPolicyPort } from 'cdk8s-plus-30'

NetworkPolicyPort.udpRange(startPort: number, endPort: number)
startPortRequired
  • Type: number
endPortRequired
  • Type: number

Node

Represents a node in the cluster.

Initializers 

import { Node } from 'cdk8s-plus-30'

new Node()

Static Functions

labeled 
import { Node } from 'cdk8s-plus-30'

Node.labeled(labelSelector: NodeLabelQuery)
labelSelectorRequired
named 
import { Node } from 'cdk8s-plus-30'

Node.named(nodeName: string)
nodeNameRequired
  • Type: string
tainted 
import { Node } from 'cdk8s-plus-30'

Node.tainted(taintSelector: NodeTaintQuery)
taintSelectorRequired

NodeLabelQuery

Represents a query that can be performed against nodes with labels.

Static Functions

doesNotExist 
import { NodeLabelQuery } from 'cdk8s-plus-30'

NodeLabelQuery.doesNotExist(key: string)
keyRequired
  • Type: string
exists 
import { NodeLabelQuery } from 'cdk8s-plus-30'

NodeLabelQuery.exists(key: string)
keyRequired
  • Type: string
gt 
import { NodeLabelQuery } from 'cdk8s-plus-30'

NodeLabelQuery.gt(key: string, values: string[])
keyRequired
  • Type: string
valuesRequired
  • Type: string[]
in 
import { NodeLabelQuery } from 'cdk8s-plus-30'

NodeLabelQuery.in(key: string, values: string[])
keyRequired
  • Type: string
valuesRequired
  • Type: string[]
is 
import { NodeLabelQuery } from 'cdk8s-plus-30'

NodeLabelQuery.is(key: string, value: string)
keyRequired
  • Type: string
valueRequired
  • Type: string
lt 
import { NodeLabelQuery } from 'cdk8s-plus-30'

NodeLabelQuery.lt(key: string, values: string[])
keyRequired
  • Type: string
valuesRequired
  • Type: string[]
notIn 
import { NodeLabelQuery } from 'cdk8s-plus-30'

NodeLabelQuery.notIn(key: string, values: string[])
keyRequired
  • Type: string
valuesRequired
  • Type: string[]

NodeTaintQuery

Taint queries that can be perfomed against nodes.

Static Functions

any 
import { NodeTaintQuery } from 'cdk8s-plus-30'

NodeTaintQuery.any()
exists 
import { NodeTaintQuery } from 'cdk8s-plus-30'

NodeTaintQuery.exists(key: string, options?: NodeTaintQueryOptions)
keyRequired
  • Type: string
optionsOptional
is 
import { NodeTaintQuery } from 'cdk8s-plus-30'

NodeTaintQuery.is(key: string, value: string, options?: NodeTaintQueryOptions)
keyRequired
  • Type: string
valueRequired
  • Type: string
optionsOptional

NonApiResource

Factory for creating non api resources.

Methods

asApiResource 
public asApiResource()
asNonApiResource 
public asNonApiResource()

Static Functions

of 
import { NonApiResource } from 'cdk8s-plus-30'

NonApiResource.of(url: string)
urlRequired
  • Type: string

PercentOrAbsolute

Union like class repsenting either a ration in percents or an absolute number.

Methods

isZero 
public isZero()

Static Functions

absolute 
import { PercentOrAbsolute } from 'cdk8s-plus-30'

PercentOrAbsolute.absolute(num: number)
numRequired
  • Type: number
percent 
import { PercentOrAbsolute } from 'cdk8s-plus-30'

PercentOrAbsolute.percent(percent: number)
percentRequired
  • Type: number

Properties

valueRequired 
public readonly value: any;
  • Type: any

PodConnections

Controls network isolation rules for inter-pod communication.

Initializers 

import { PodConnections } from 'cdk8s-plus-30'

new PodConnections(instance: AbstractPod)
instanceRequired

Methods

allowFrom 
public allowFrom(peer: INetworkPolicyPeer, options?: PodConnectionsAllowFromOptions)
peerRequired
optionsOptional
allowTo 
public allowTo(peer: INetworkPolicyPeer, options?: PodConnectionsAllowToOptions)
peerRequired
optionsOptional
isolate 
public isolate()

PodDns

Holds dns settings of the pod.

Initializers 

import { PodDns } from 'cdk8s-plus-30'

new PodDns(props?: PodDnsProps)
propsOptional

Methods

addNameserver 
public addNameserver(nameservers: string)
nameserversRequired
  • Type: string
addOption 
public addOption(options: DnsOption)
optionsRequired
addSearch 
public addSearch(searches: string)
searchesRequired
  • Type: string

Properties

hostnameAsFQDNRequired 
public readonly hostnameAsFQDN: boolean;
  • Type: boolean

Whether or not the pods hostname is set to its FQDN.

nameserversRequired 
public readonly nameservers: string[];
  • Type: string[]

Nameservers defined for this pod.

optionsRequired 
public readonly options: DnsOption[];

Custom dns options defined for this pod.

policyRequired 
public readonly policy: DnsPolicy;

The DNS policy of this pod.

searchesRequired 
public readonly searches: string[];
  • Type: string[]

Search domains defined for this pod.

hostnameOptional 
public readonly hostname: string;
  • Type: string

The configured hostname of the pod.

Undefined means its set to a system-defined value.

subdomainOptional 
public readonly subdomain: string;
  • Type: string

The configured subdomain of the pod.

PodScheduling

Controls the pod scheduling strategy.

Initializers 

import { PodScheduling } from 'cdk8s-plus-30'

new PodScheduling(instance: AbstractPod)
instanceRequired

Methods

assign 
public assign(node: NamedNode)
nodeRequired
attract 
public attract(node: LabeledNode, options?: PodSchedulingAttractOptions)
nodeRequired
optionsOptional
colocate 
public colocate(selector: IPodSelector, options?: PodSchedulingColocateOptions)
selectorRequired
optionsOptional
separate 
public separate(selector: IPodSelector, options?: PodSchedulingSeparateOptions)
selectorRequired
optionsOptional
tolerate 
public tolerate(node: TaintedNode)
nodeRequired

PodSecurityContext

Holds pod-level security attributes and common container settings.

Initializers 

import { PodSecurityContext } from 'cdk8s-plus-30'

new PodSecurityContext(props?: PodSecurityContextProps)
propsOptional

Properties

ensureNonRootRequired 
public readonly ensureNonRoot: boolean;
  • Type: boolean
fsGroupChangePolicyRequired 
public readonly fsGroupChangePolicy: FsGroupChangePolicy;
sysctlsRequired 
public readonly sysctls: Sysctl[];
fsGroupOptional 
public readonly fsGroup: number;
  • Type: number
groupOptional 
public readonly group: number;
  • Type: number
userOptional 
public readonly user: number;
  • Type: number

Probe

Probe describes a health check to be performed against a container to determine whether it is alive or ready to receive traffic.

Static Functions

fromCommand 
import { Probe } from 'cdk8s-plus-30'

Probe.fromCommand(command: string[], options?: CommandProbeOptions)
commandRequired
  • Type: string[]

The command to execute.

optionsOptional

Options.

fromHttpGet 
import { Probe } from 'cdk8s-plus-30'

Probe.fromHttpGet(path: string, options?: HttpGetProbeOptions)
pathRequired
  • Type: string

The URL path to hit.

optionsOptional

Options.

fromTcpSocket 
import { Probe } from 'cdk8s-plus-30'

Probe.fromTcpSocket(options?: TcpSocketProbeOptions)
optionsOptional

Options.

Replicas

The amount of replicas that will change.

Static Functions

absolute 
import { Replicas } from 'cdk8s-plus-30'

Replicas.absolute(value: number)
valueRequired
  • Type: number

The amount of change to apply.

Must be greater than 0.

percent 
import { Replicas } from 'cdk8s-plus-30'

Replicas.percent(value: number)
valueRequired
  • Type: number

The percentage of change to apply.

Must be greater than 0.

ResourcePermissions

Controls permissions for operations on resources.

Initializers 

import { ResourcePermissions } from 'cdk8s-plus-30'

new ResourcePermissions(instance: Resource)
instanceRequired

Methods

grantRead 
public grantRead(subjects: ISubject)
subjectsRequired
grantReadWrite 
public grantReadWrite(subjects: ISubject)
subjectsRequired

StatefulSetUpdateStrategy

StatefulSet update strategies.

Static Functions

onDelete 
import { StatefulSetUpdateStrategy } from 'cdk8s-plus-30'

StatefulSetUpdateStrategy.onDelete()
rollingUpdate 
import { StatefulSetUpdateStrategy } from 'cdk8s-plus-30'

StatefulSetUpdateStrategy.rollingUpdate(options?: StatefulSetUpdateStrategyRollingUpdateOptions)
optionsOptional

TaintedNode

A node that is matched by taint selectors.

Initializers 

import { TaintedNode } from 'cdk8s-plus-30'

new TaintedNode(taintSelector: NodeTaintQuery[])
taintSelectorRequired

Properties

taintSelectorRequired 
public readonly taintSelector: NodeTaintQuery[];

Topology

Available topology domains.

Static Functions

custom 
import { Topology } from 'cdk8s-plus-30'

Topology.custom(key: string)
keyRequired
  • Type: string

Properties

keyRequired 
public readonly key: string;
  • Type: string

Constants

HOSTNAME

A hostname represents a single node in the cluster.

https://kubernetes.io/docs/reference/labels-annotations-taints/#kubernetesiohostname

REGION

A region represents a larger domain, made up of one or more zones.

It is uncommon for Kubernetes clusters to span multiple regions. While the exact definition of a zone or region is left to infrastructure implementations, common properties of a region include higher network latency between them than within them, non-zero cost for network traffic between them, and failure independence from other zones or regions.

For example, nodes within a region might share power infrastructure (e.g. a UPS or generator), but nodes in different regions typically would not.

https://kubernetes.io/docs/reference/labels-annotations-taints/#topologykubernetesioregion

ZONE

A zone represents a logical failure domain.

It is common for Kubernetes clusters to span multiple zones for increased availability. While the exact definition of a zone is left to infrastructure implementations, common properties of a zone include very low network latency within a zone, no-cost network traffic within a zone, and failure independence from other zones. For example, nodes within a zone might share a network switch, but nodes in different zones should not.

https://kubernetes.io/docs/reference/labels-annotations-taints/#topologykubernetesiozone

WorkloadScheduling

Controls the pod scheduling strategy of this workload.

It offers some additional API’s on top of the core pod scheduling.

Initializers 

import { WorkloadScheduling } from 'cdk8s-plus-30'

new WorkloadScheduling(instance: AbstractPod)
instanceRequired

Methods

spread 
public spread(options?: WorkloadSchedulingSpreadOptions)
optionsOptional

Protocols

IApiEndpoint

An API Endpoint can either be a resource descriptor (e.g /pods) or a non resource url (e.g /healthz). It must be one or the other, and not both.

Methods

asApiResource 
public asApiResource()
asNonApiResource 
public asNonApiResource()

IApiResource

Represents a resource or collection of resources.

Properties

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

IClusterRole

Represents a cluster-level role.

Properties

nodeRequired 
public readonly node: Node;

The tree node.

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

IConfigMap

Represents a config map.

Properties

nodeRequired 
public readonly node: Node;

The tree node.

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

INamespaceSelector

Represents an object that can select namespaces.

Methods

toNamespaceSelectorConfig 
public toNamespaceSelectorConfig()

Properties

nodeRequired 
public readonly node: Node;

The tree node.

INetworkPolicyPeer

Describes a peer to allow traffic to/from.

Methods

toNetworkPolicyPeerConfig 
public toNetworkPolicyPeerConfig()
toPodSelector 
public toPodSelector()

Properties

nodeRequired 
public readonly node: Node;

The tree node.

IPersistentVolume

Contract of a PersistentVolumeClaim.

Properties

nodeRequired 
public readonly node: Node;

The tree node.

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

IPersistentVolumeClaim

Contract of a PersistentVolumeClaim.

Properties

nodeRequired 
public readonly node: Node;

The tree node.

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

IPodSelector

Represents an object that can select pods.

Methods

toPodSelectorConfig 
public toPodSelectorConfig()

Properties

nodeRequired 
public readonly node: Node;

The tree node.

IResource

Represents a resource.

Properties

nodeRequired 
public readonly node: Node;

The tree node.

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

IRole

A reference to any Role or ClusterRole.

Properties

nodeRequired 
public readonly node: Node;

The tree node.

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

IScalable

Represents a scalable workload.

Methods

markHasAutoscaler 
public markHasAutoscaler()
toScalingTarget 
public toScalingTarget()

Properties

hasAutoscalerRequired 
public readonly hasAutoscaler: boolean;
  • Type: boolean

If this is a target of an autoscaler.

ISecret

Methods

envValue 
public envValue(key: string, options?: EnvValueFromSecretOptions)
keyRequired
  • Type: string

Secret’s key.

optionsOptional

Additional EnvValue options.

Properties

nodeRequired 
public readonly node: Node;

The tree node.

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

IServiceAccount

Properties

nodeRequired 
public readonly node: Node;

The tree node.

apiGroupRequired 
public readonly apiGroup: string;
  • Type: string

The group portion of the API version (e.g. authorization.k8s.io).

resourceTypeRequired 
public readonly resourceType: string;
  • Type: string

The name of a resource type as it appears in the relevant API endpoint.

https://kubernetes.io/docs/reference/access-authn-authz/rbac/#referring-to-resources

resourceNameOptional 
public readonly resourceName: string;
  • Type: string

The unique, namespace-global, name of an object inside the Kubernetes cluster.

If this is omitted, the ApiResource should represent all objects of the given type.

apiVersionRequired 
public readonly apiVersion: string;
  • Type: string

The object’s API version (e.g. “authorization.k8s.io/v1”).

kindRequired 
public readonly kind: string;
  • Type: string

The object kind (e.g. “Deployment”).

nameRequired 
public readonly name: string;
  • Type: string

The Kubernetes name of this resource.

IStorage

Represents a piece of storage in the cluster.

Methods

asVolume 
public asVolume()

Properties

nodeRequired 
public readonly node: Node;

The tree node.

ISubject

Represents an object that can be used as a role binding subject.

Methods

toSubjectConfiguration 
public toSubjectConfiguration()

Properties

nodeRequired 
public readonly node: Node;

The tree node.

Enums

AzureDiskPersistentVolumeCachingMode

Azure disk caching modes.

NONE

None.

READ_ONLY

ReadOnly.

READ_WRITE

ReadWrite.

AzureDiskPersistentVolumeKind

Azure Disk kinds.

SHARED

Multiple blob disks per storage account.

DEDICATED

Single blob disk per storage account.

MANAGED

Azure managed data disk.

Capability

Capability - complete list of POSIX capabilities.

ALL

ALL.

AUDIT_CONTROL

CAP_AUDIT_CONTROL.

AUDIT_READ

CAP_AUDIT_READ.

AUDIT_WRITE

CAP_AUDIT_WRITE.

BLOCK_SUSPEND

CAP_BLOCK_SUSPEND.

BPF

CAP_BPF.

CHECKPOINT_RESTORE

CAP_CHECKPOINT_RESTORE.

CHOWN

CAP_CHOWN.

DAC_OVERRIDE

CAP_DAC_OVERRIDE.

CAP_DAC_READ_SEARCH.

FOWNER

CAP_FOWNER.

FSETID

CAP_FSETID.

IPC_LOCK

CAP_IPC_LOCK.

IPC_OWNER

CAP_IPC_OWNER.

KILL

CAP_KILL.

LEASE

CAP_LEASE.

LINUX_IMMUTABLE

CAP_LINUX_IMMUTABLE.

MAC_ADMIN

CAP_MAC_ADMIN.

MAC_OVERRIDE

CAP_MAC_OVERRIDE.

MKNOD

CAP_MKNOD.

NET_ADMIN

CAP_NET_ADMIN.

NET_BIND_SERVICE

CAP_NET_BIND_SERVICE.

NET_BROADCAST

CAP_NET_BROADCAST.

NET_RAW

CAP_NET_RAW.

PERFMON

CAP_PERFMON.

SETGID

CAP_SETGID.

SETFCAP

CAP_SETFCAP.

SETPCAP

CAP_SETPCAP.

SETUID

CAP_SETUID.

SYS_ADMIN

CAP_SYS_ADMIN.

SYS_BOOT

CAP_SYS_BOOT.

SYS_CHROOT

CAP_SYS_CHROOT.

SYS_MODULE

CAP_SYS_MODULE.

SYS_NICE

CAP_SYS_NICE.

SYS_PACCT

CAP_SYS_PACCT.

SYS_PTRACE

CAP_SYS_PTRACE.

SYS_RAWIO

CAP_SYS_RAWIO.

SYS_RESOURCE

CAP_SYS_RESOURCE.

SYS_TIME

CAP_SYS_TIME.

SYS_TTY_CONFIG

CAP_SYS_TTY_CONFIG.

SYSLOG

CAP_SYSLOG.

WAKE_ALARM

CAP_WAKE_ALARM.

ConcurrencyPolicy

Concurrency policy for CronJobs.

ALLOW

This policy allows to run job concurrently.

FORBID

This policy does not allow to run job concurrently.

It does not let a new job to be scheduled if the previous one is not finished yet.

REPLACE

This policy replaces the currently running job if a new job is being scheduled.

ConnectionScheme

HTTP

Use HTTP request for connecting to host.

HTTPS

Use HTTPS request for connecting to host.

ContainerRestartPolicy

RestartPolicy defines the restart behavior of individual containers in a pod.

This field may only be set for init containers, and the only allowed value is “Always”. For non-init containers or when this field is not specified, the restart behavior is defined by the Pod’s restart policy and the container type. Setting the RestartPolicy as “Always” for the init container will have the following effect: this init container will be continually restarted on exit until all regular containers have terminated. Once all regular containers have completed, all init containers with restartPolicy “Always” will be shut down. This lifecycle differs from normal init containers and is often referred to as a “sidecar” container.

https://kubernetes.io/docs/concepts/workloads/pods/sidecar-containers/

ALWAYS

If an init container is created with its restartPolicy set to Always, it will start and remain running during the entire life of the Pod.

For regular containers, this is ignored by Kubernetes.

DnsPolicy

Pod DNS policies.

CLUSTER_FIRST

Any DNS query that does not match the configured cluster domain suffix, such as “www.kubernetes.io”, is forwarded to the upstream nameserver inherited from the node. Cluster administrators may have extra stub-domain and upstream DNS servers configured.

CLUSTER_FIRST_WITH_HOST_NET

For Pods running with hostNetwork, you should explicitly set its DNS policy “ClusterFirstWithHostNet”.

DEFAULT

The Pod inherits the name resolution configuration from the node that the pods run on.

NONE

It allows a Pod to ignore DNS settings from the Kubernetes environment.

All DNS settings are supposed to be provided using the dnsConfig field in the Pod Spec.

EmptyDirMedium

The medium on which to store the volume.

DEFAULT

The default volume of the backing node.

MEMORY

Mount a tmpfs (RAM-backed filesystem) for you instead.

While tmpfs is very fast, be aware that unlike disks, tmpfs is cleared on node reboot and any files you write will count against your Container’s memory limit.

EnvFieldPaths

POD_NAME

The name of the pod.

POD_NAMESPACE

The namespace of the pod.

POD_UID

The uid of the pod.

POD_LABEL

The labels of the pod.

POD_ANNOTATION

The annotations of the pod.

POD_IP

The ipAddress of the pod.

SERVICE_ACCOUNT_NAME

The service account name of the pod.

NODE_NAME

The name of the node.

NODE_IP

The ipAddress of the node.

POD_IPS

The ipAddresess of the pod.

FsGroupChangePolicy

ON_ROOT_MISMATCH

Only change permissions and ownership if permission and ownership of root directory does not match with expected permissions of the volume.

This could help shorten the time it takes to change ownership and permission of a volume

ALWAYS

Always change permission and ownership of the volume when volume is mounted.

HostPathVolumeType

Host path types.

DEFAULT

Empty string (default) is for backward compatibility, which means that no checks will be performed before mounting the hostPath volume.

DIRECTORY_OR_CREATE

If nothing exists at the given path, an empty directory will be created there as needed with permission set to 0755, having the same group and ownership with Kubelet.

DIRECTORY

A directory must exist at the given path.

FILE_OR_CREATE

If nothing exists at the given path, an empty file will be created there as needed with permission set to 0644, having the same group and ownership with Kubelet.

FILE

A file must exist at the given path.

SOCKET

A UNIX socket must exist at the given path.

CHAR_DEVICE

A character device must exist at the given path.

BLOCK_DEVICE

A block device must exist at the given path.

HttpIngressPathType

Specify how the path is matched against request paths.

https://kubernetes.io/docs/concepts/services-networking/ingress/#path-types

PREFIX

Matches the URL path exactly.

EXACT

Matches based on a URL path prefix split by ‘/’.

IMPLEMENTATION_SPECIFIC

Matching is specified by the underlying IngressClass.

ImagePullPolicy

ALWAYS

Every time the kubelet launches a container, the kubelet queries the container image registry to resolve the name to an image digest.

If the kubelet has a container image with that exact digest cached locally, the kubelet uses its cached image; otherwise, the kubelet downloads (pulls) the image with the resolved digest, and uses that image to launch the container.

Default is Always if ImagePullPolicy is omitted and either the image tag is :latest or the image tag is omitted.

IF_NOT_PRESENT

The image is pulled only if it is not already present locally.

Default is IfNotPresent if ImagePullPolicy is omitted and the image tag is present but not :latest

NEVER

The image is assumed to exist locally.

No attempt is made to pull the image.

MountPropagation

NONE

This volume mount will not receive any subsequent mounts that are mounted to this volume or any of its subdirectories by the host.

In similar fashion, no mounts created by the Container will be visible on the host.

This is the default mode.

This mode is equal to private mount propagation as described in the Linux kernel documentation

HOST_TO_CONTAINER

This volume mount will receive all subsequent mounts that are mounted to this volume or any of its subdirectories.

In other words, if the host mounts anything inside the volume mount, the Container will see it mounted there.

Similarly, if any Pod with Bidirectional mount propagation to the same volume mounts anything there, the Container with HostToContainer mount propagation will see it.

This mode is equal to rslave mount propagation as described in the Linux kernel documentation

BIDIRECTIONAL

This volume mount behaves the same the HostToContainer mount.

In addition, all volume mounts created by the Container will be propagated back to the host and to all Containers of all Pods that use the same volume

A typical use case for this mode is a Pod with a FlexVolume or CSI driver or a Pod that needs to mount something on the host using a hostPath volume.

This mode is equal to rshared mount propagation as described in the Linux kernel documentation

Caution: Bidirectional mount propagation can be dangerous. It can damage the host operating system and therefore it is allowed only in privileged Containers. Familiarity with Linux kernel behavior is strongly recommended. In addition, any volume mounts created by Containers in Pods must be destroyed (unmounted) by the Containers on termination.

NetworkPolicyTrafficDefault

Default behaviors of network traffic in policies.

DENY

The policy denies all traffic.

Since rules are additive, additional rules or policies can allow specific traffic.

ALLOW

The policy allows all traffic (either ingress or egress).

Since rules are additive, no additional rule or policies can subsequently deny the traffic.

NetworkProtocol

Network protocols.

TCP

TCP.

UDP

UDP.

SCTP

SCTP.

PersistentVolumeAccessMode

Access Modes.

READ_WRITE_ONCE

The volume can be mounted as read-write by a single node.

ReadWriteOnce access mode still can allow multiple pods to access the volume when the pods are running on the same node.

READ_ONLY_MANY

The volume can be mounted as read-only by many nodes.

READ_WRITE_MANY

The volume can be mounted as read-write by many nodes.

READ_WRITE_ONCE_POD

The volume can be mounted as read-write by a single Pod.

Use ReadWriteOncePod access mode if you want to ensure that only one pod across whole cluster can read that PVC or write to it. This is only supported for CSI volumes and Kubernetes version 1.22+.

PersistentVolumeMode

Volume Modes.

FILE_SYSTEM

Volume is ounted into Pods into a directory.

If the volume is backed by a block device and the device is empty, Kubernetes creates a filesystem on the device before mounting it for the first time.

BLOCK

Use a volume as a raw block device.

Such volume is presented into a Pod as a block device, without any filesystem on it. This mode is useful to provide a Pod the fastest possible way to access a volume, without any filesystem layer between the Pod and the volume. On the other hand, the application running in the Pod must know how to handle a raw block device

PersistentVolumeReclaimPolicy

Reclaim Policies.

RETAIN

The Retain reclaim policy allows for manual reclamation of the resource.

When the PersistentVolumeClaim is deleted, the PersistentVolume still exists and the volume is considered “released”. But it is not yet available for another claim because the previous claimant’s data remains on the volume. An administrator can manually reclaim the volume with the following steps:

  1. Delete the PersistentVolume. The associated storage asset in external infrastructure (such as an AWS EBS, GCE PD, Azure Disk, or Cinder volume) still exists after the PV is deleted.
  2. Manually clean up the data on the associated storage asset accordingly.
  3. Manually delete the associated storage asset.

If you want to reuse the same storage asset, create a new PersistentVolume with the same storage asset definition.

DELETE

For volume plugins that support the Delete reclaim policy, deletion removes both the PersistentVolume object from Kubernetes, as well as the associated storage asset in the external infrastructure, such as an AWS EBS, GCE PD, Azure Disk, or Cinder volume.

Volumes that were dynamically provisioned inherit the reclaim policy of their StorageClass, which defaults to Delete. The administrator should configure the StorageClass according to users’ expectations; otherwise, the PV must be edited or patched after it is created

PodConnectionsIsolation

Isolation determines which policies are created when allowing connections from a a pod / workload to peers.

POD

Only creates network policies that select the pod.

PEER

Only creates network policies that select the peer.

PodManagementPolicy

Controls how pods are created during initial scale up, when replacing pods on nodes, or when scaling down.

The default policy is OrderedReady, where pods are created in increasing order (pod-0, then pod-1, etc) and the controller will wait until each pod is ready before continuing. When scaling down, the pods are removed in the opposite order.

The alternative policy is Parallel which will create pods in parallel to match the desired scale without waiting, and on scale down will delete all pods at once.

ORDERED_READY

PARALLEL

Protocol

Network protocols.

TCP

TCP.

UDP

UDP.

SCTP

SCTP.

ResourceFieldPaths

CPU_LIMIT

CPU limit of the container.

MEMORY_LIMIT

Memory limit of the container.

CPU_REQUEST

CPU request of the container.

MEMORY_REQUEST

Memory request of the container.

STORAGE_LIMIT

Ephemeral storage limit of the container.

STORAGE_REQUEST

Ephemeral storage request of the container.

RestartPolicy

Restart policy for all containers within the pod.

ALWAYS

Always restart the pod after it exits.

ON_FAILURE

Only restart if the pod exits with a non-zero exit code.

NEVER

Never restart the pod.

ScalingStrategy

MAX_CHANGE

Use the policy that provisions the most changes.

MIN_CHANGE

Use the policy that provisions the least amount of changes.

~~DISABLED~~

  • Deprecated: - Omit the ScalingRule instead

Disables scaling in this direction.

SeccompProfileType

LOCALHOST

A profile defined in a file on the node should be used.

RUNTIME_DEFAULT

The container runtime default profile should be used.

UNCONFINED

No profile should be applied.

ServiceType

For some parts of your application (for example, frontends) you may want to expose a Service onto an external IP address, that’s outside of your cluster.

Kubernetes ServiceTypes allow you to specify what kind of Service you want. The default is ClusterIP.

CLUSTER_IP

Exposes the Service on a cluster-internal IP.

Choosing this value makes the Service only reachable from within the cluster. This is the default ServiceType

NODE_PORT

Exposes the Service on each Node’s IP at a static port (the NodePort).

A ClusterIP Service, to which the NodePort Service routes, is automatically created. You’ll be able to contact the NodePort Service, from outside the cluster, by requesting :.

LOAD_BALANCER

Exposes the Service externally using a cloud provider’s load balancer.

NodePort and ClusterIP Services, to which the external load balancer routes, are automatically created.

EXTERNAL_NAME

Maps the Service to the contents of the externalName field (e.g. foo.bar.example.com), by returning a CNAME record with its value. No proxying of any kind is set up.

Note: You need either kube-dns version 1.7 or CoreDNS version 0.0.8 or higher to use the ExternalName type.

TaintEffect

Taint effects.

NO_SCHEDULE

This means that no pod will be able to schedule onto the node unless it has a matching toleration.

PREFER_NO_SCHEDULE

This is a “preference” or “soft” version of NO_SCHEDULE – the system will try to avoid placing a pod that does not tolerate the taint on the node, but it is not required.

NO_EXECUTE

This affects pods that are already running on the node as follows:.

Pods that do not tolerate the taint are evicted immediately. - Pods that tolerate the taint without specifying duration remain bound forever. - Pods that tolerate the taint with a specified duration remain bound for the specified amount of time.